We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange simplex multimode fibre patch cable with ST connectors at both ends, 9.84 ft long

Camplex

Camplex 62.5/125 Multimode Simplex ST to ST Fiber Optic Patch Cable Orange

SKU CH-0T3M-CJ7Y0

A 62.5/125 µm multimode simplex fiber patch cable with ST-to-ST connectors for high-speed data links over 9.84 ft

  • High-speed data transfer over 3m length with 62.5/125µm multimode fiber
  • Secure ST-to-ST connectors ensure stable signal alignment
  • Orange OFNR riser jacket adds safety and durability
  • Simplex design optimised for single-direction high-bandwidth links
  • Rigorously tested for reliable performance in demanding conditions

3m 62.5/125 Multimode Simplex ST Patch Cable

This 3 metre (9.84 foot) multimode fiber patch cable uses a 62.5/125 micron core and simplex ST connectors at both ends. It is built for short-range, high-speed data links in local area networks and data centres. The orange OFNR riser-rated jacket meets fire-safety requirements for vertical runs between floors. It suits installers who need a ready-to-use simplex link with ST interfaces.

Who this suits and who should look elsewhere

The cable fits networks that specify 62.5/125 micron multimode fiber and ST termination on both sides. It will not serve installations that require duplex connectivity, different connector types, or single-mode fiber. Buyers needing longer reach or higher bandwidth grades should select a cable matched to those specifications.

Deciding specification — 62.5/125 micron multimode

The core diameter of 62.5/125 microns determines bandwidth and distance limits for the link. Match this figure exactly to the existing fiber plant or equipment port specification before purchasing. Mismatched core sizes cause excessive loss and connection failures.

Highlights

  • High-speed data transfer over 3m length with 62.5/125µm multimode fiber
  • Secure ST-to-ST connectors ensure stable signal alignment
  • Orange OFNR riser jacket adds safety and durability
  • Simplex design optimised for single-direction high-bandwidth links
  • Rigorously tested for reliable performance in demanding conditions

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the 62.5/125 µm multimode link is working after connecting the ST connectors?

Check that the link lights on both network ports show an active connection and run a continuity test with a fiber power meter or visual fault locator to confirm light passes through the 3 m (9.84 ft) cable without excessive loss.

What comes in the box and what must I purchase separately to use this patch cable?

The package contains the 3 m (9.84 ft) orange OFNR multimode simplex cable with ST connectors on both ends; you must supply compatible ST bulkheads, transceivers or patch panels at each end.

Which version should I choose for a 62.5/125 µm multimode network running up to 3 metres?

Select this 3 m (9.84 ft) simplex ST-to-ST cable with the orange OFNR jacket; it matches the 62.5/125 µm core/cladding specification and riser-rated fire code for indoor runs of that length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.