We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver frost-proof yard hydrant with cast iron head and lockable handle, 93 inches overall length

Campbell

Campbell YH-5LF Frost Proof Yard Hydrant 5 ft Bury Depth

SKU CH-H0ZZ-N04A6

Frost-proof yard hydrant with 5 ft bury depth and self-draining bleeder valve

  • TypePipes, Valves & Fittings
  • Lead-free construction meets NSF 61 drinking-water standards
  • Self-draining bleeder valve prevents freeze damage in winter
  • 93 in overall length with 5 ft bury depth for deep frost lines
  • Lockable cast-iron handle secures water access against tampering
  • Brass rod and nitrile plunger deliver reliable shut-off at 60 psi

Campbell YH-5LF Frost Proof Yard Hydrant

The Campbell YH-5LF is a lead-free frost proof yard hydrant designed for outdoor water supply in freezing conditions. It features a 5 ft bury depth and an overall length of 93 in. The unit is built with a 1 in galvanized casing and cast iron head for durability. It meets NSF 61 standards for potable water safety.

Replaces standard spigots prone to freezing

This hydrant upgrades installations where a basic hose bibb fails in cold weather. The self-draining bleeder valve empties the riser after each use to prevent ice damage. The jump is worth it when the supply line sits below the frost line at a 5 ft depth. It handles a maximum pressure of 60 psi for typical residential service.

Installation uses 3/4 in FNPT inlet connection

The inlet connects to a 3/4 in female NPT fitting on the supply line. The outlet accepts a standard 3/4 in hose thread for immediate use. A lockable cast iron handle secures the operating rod against unauthorized operation. The 7/16 in brass rod and nitrile plunger resist corrosion, though debris in the line can foul the plunger seat.

Highlights

  • Lead-free construction meets NSF 61 drinking-water standards
  • Self-draining bleeder valve prevents freeze damage in winter
  • 93 in overall length with 5 ft bury depth for deep frost lines
  • Lockable cast-iron handle secures water access against tampering
  • Brass rod and nitrile plunger deliver reliable shut-off at 60 psi

Specifications

BrandCAMPBELL
TypePipes, Valves & Fittings

Questions about this item

What inlet connection does the 3/4 in FNPT yard hydrant need to attach to the water line?

The hydrant has a 3/4 inch FNPT inlet that threads onto a matching male pipe thread; use pipe sealant rated for potable water and tighten to the fitting manufacturer's torque value.

What is the correct sequence for installing the self-draining bleeder valve so the hydrant empties after each use?

Set the hydrant plumb in the trench, backfill around the 1 in galvanized casing, then open the lockable handle fully to let the bleeder valve purge water from the 7/16 in brass rod chamber before closing.

Which internal parts should be inspected or replaced after several seasons of 60 psi service?

The nitrile plunger and brass rod are the wear items; remove the cast-iron head, pull the rod assembly, and replace the plunger if it shows cracking or loss of seal at the 60 psi rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.