We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, black finish, thin profile

Cameron Sino Battery for XTOOL AutoPropad Basic Key Programme 5000mAh 18.5Wh

SKU CH-41F2-9KWMA

Replacement lithium-polymer battery for XTOOL AutoPropad Basic and D7 scanners, 5000mAh 18.5Wh 3.7V with ISO9001, RoHS and CE certification

  • FeaturesReplacement for
  • Weight130.0
  • Replacement battery for XTOOL AutoPropad, D7, EZ300, EZ400, PS70 Pro tools
  • 5000 mAh capacity and 18.5 Wh energy for extended diagnostic sessions
  • 7 V lithium-polymer cell matches original voltage specification
  • Compact 101.90 x 59.50 x 6.00 mm form factor fits the device bay
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection circuits

Replacement Battery for XTOOL Diagnostic Tools

This lithium-polymer battery replaces the original power cell in XTOOL AutoPropad Basic Key Programme, D7 BT, D7 Diagnostic Scan Tool, EZ300 Pro Scanners, EZ400 Pro Scanners and PS70 PRO Diagnostic Scan Tool. It matches the PL6065100 part number and delivers 5000mAh capacity at 3.7V for 18.5Wh of energy. The pack is built to the same dimensions of 101.90 x 59.50 x 6.00mm and weighs 80.0g. It is certified to ISO9001, RoHS and CE standards.

Thermals Noise and Power Draw

The 5000mAh cell provides steady 3.7V output during diagnostic sessions without active cooling or audible noise. Power draw scales with the tool workload and the battery management circuit protects against overcharge, over-discharge, over-voltage and short-circuit conditions. Normal use sees the pack cycle through charge and discharge without thermal throttling. Full performance is reached after two or three complete cycles.

Upgrade Path and When It Is Worth It

This unit restores runtime to tools whose original batteries no longer hold sufficient charge. It is not for users who need a higher-capacity cell than 5000mAh or a different voltage rail. The jump is worth it when the diagnostic scanner shuts down prematurely or fails to power on away from mains supply. Compatibility must be verified against the device model number and the PL6065100 part number before purchase.

Highlights

  • Replacement battery for XTOOL AutoPropad, D7, EZ300, EZ400, PS70 Pro tools
  • 5000 mAh capacity and 18.5 Wh energy for extended diagnostic sessions
  • 7 V lithium-polymer cell matches original voltage specification
  • Compact 101.90 x 59.50 x 6.00 mm form factor fits the device bay
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection circuits

Specifications

BrandCameron Sino
FeaturesReplacement for
Weight130.0

Questions about this item

How do I install the replacement battery in my XTOOL AutoPropad Basic Key Programme and what step is often missed?

Open the device, disconnect the old pack, then connect the new 3.7 V 5000 mAh cell ensuring the connector seats fully — a loose plug is the step most people miss.

What maintenance will this 18.5 Wh lithium-polymer pack need over its life?

Run two or three full charge and discharge cycles when new, then avoid low-quality third-party chargers; no scheduled servicing is required beyond normal use.

Which limit appears first during continuous diagnostic sessions with the D7 BT scanner?

The 5000 mAh capacity sets the runtime ceiling; sustained heavy use will drain the pack before thermal or voltage protection triggers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.