Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081004BTC
In stock
Cameron Sino Battery for IBM ServeRAID M5000 M5014 M5015 M5100 1500mAh
Replacement battery for IBM ServeRAID controllers, 1500 mAh capacity with decoded chip and protection circuits
- Replacement for IBM ServeRAID M5000, M5014, M5015, M5100 controllers
- Capacity 1500mAh and 5.55Wh at 3.7V for reliable cache backup
- Dimensions 76.10 x 53.56 x 15.06mm fit original chassis exactly
- ISO9001, RoHS and CE certified with overcharge and short-circuit protection
- Supplied new with decoded chip and protective foam packaging
Replacement battery for IBM ServeRAID controllers
This Cameron Sino unit replaces the original battery in IBM ServeRAID M5000, M5014, M5015 and M5100 RAID controllers as well as System S3250 M3 and System X3630 M3 7377 servers. It matches the listed part numbers including 46M0851, 46M0917, 46M0930 and 81Y4508. The battery is intended for administrators maintaining cache backup on these specific controller models. It is not for users whose RAID hardware uses a different form factor or voltage.
Sustained cache-backup behaviour
The cell delivers a nominal 3.7 V and 1500 mAh capacity, rated at 5.55 Wh, to preserve write cache during extended power interruptions. A fully decoded chip communicates with the controller so charge status reports remain accurate over repeated cycles. Built-in protection guards against overcharge, over-discharge, over-voltage and short-circuit events during long-term operation. Buyers who need a higher capacity cell for longer hold-up times cannot use this model.
1500 mAh capacity decides fit
The single specification that determines compatibility is the 1500 mAh rating at 3.7 V, which must match the original battery exactly for the controller to accept it. Dimensions of 76.10 x 53.56 x 15.06 mm and a weight of 55.6 g follow the same envelope as the IBM part. If the target system requires a different ampere-hour value or physical profile, this battery will not install or function correctly.
Highlights
- Replacement for IBM ServeRAID M5000, M5014, M5015, M5100 controllers
- Capacity 1500mAh and 5.55Wh at 3.7V for reliable cache backup
- Dimensions 76.10 x 53.56 x 15.06mm fit original chassis exactly
- ISO9001, RoHS and CE certified with overcharge and short-circuit protection
- Supplied new with decoded chip and protective foam packaging
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | MegaRAID 9260, MegaRAID 9260-8i, MegaRAID 9261, MegaRAID 9280 |
Questions about this item
How much heat or power draw does this 3.7 V 1500 mAh battery produce while the RAID controller runs all day?
The cell delivers 5.55 Wh at 3.7 V with built-in over-voltage and short-circuit protection, so heat and power draw stay minimal during continuous operation.
Which IBM controller or server part numbers must I already have for this replacement to fit?
It replaces IBM part numbers 43W4342, 46M0851, 46M0917, 46M0930, 46M0931, 67Y0186, 81Y4508, 81Y4559, 81Y4579 and 8304202 used in ServeRAID M5000, M5014, M5015, M5100, System S3250 M3 and System X3630 M3 7377.
Will this 76.10 x 53.56 x 15.06 mm battery work alongside the older MegaRAID 9260-8i or 9280 cards I still use?
The specifications list MegaRAID 9260, 9260-8i, 9261 and 9280 as compatible models, so the battery fits those controllers as well as the IBM ServeRAID units.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
