Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081248BTC
In stock
Cameron Sino 435-0012 battery charger 450mAh 1.67Wh
Replacement lithium-ion battery for Flir One Pro thermal cameras, 450mAh capacity at 3.7V with ISO9001, RoHS and CE certification
- Replacement for Flir One Pro thermal camera
- 450 mAh capacity delivers 1.67 Wh of energy
- Built-in protection against overcharge, over-discharge and short circuits
- Certified to ISO 9001, RoHS and CE standards
- Compact 37.15 × 20.00 × 7.10 mm form factor
Replacement Battery for Flir One Pro
The Cameron Sino 435-0012 is a lithium-ion replacement cell rated at 450mAh and 1.67Wh with a nominal voltage of 3.7V. It matches the original Flir SDL702035 dimensions of 37.15 x 20.00 x 7.10mm and weighs 9.2g. A fully decoded chip ensures the thermal camera recognises the battery and reports charge status correctly. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection circuits.
For owners of a Flir One Pro
This unit suits users whose original battery no longer holds a useful charge and who are comfortable opening the device to swap the pack. Buyers who cannot verify their camera model against the SDL702035 part number should not purchase. It is also unsuitable for anyone requiring a charger or external power bank, as only the bare cell is supplied.
Fits inside the Flir One Pro thermal camera housing
The cell slides into the existing battery compartment and connects to the original header, requiring no soldering or adapter cables. Installation videos are widely available online for reference. Once fitted, the camera regains its full portable runtime without needing a tethered power source. The protective foam packaging helps the cell survive transit undamaged.
Highlights
- Replacement for Flir One Pro thermal camera
- 450 mAh capacity delivers 1.67 Wh of energy
- Built-in protection against overcharge, over-discharge and short circuits
- Certified to ISO 9001, RoHS and CE standards
- Compact 37.15 × 20.00 × 7.10 mm form factor
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 435-0012, One Pro, One Pro LT |
Questions about this item
Which Flir thermal camera models accept the 435-0012 battery with its 37.15 x 20.00 x 7.10 mm dimensions?
The battery is built for the Flir One Pro and One Pro LT; matching the original SDL702035 part number and the listed dimensions confirms fit.
Will the replacement cell charge correctly through the Flir One Pro's existing USB port?
Yes, the 3.7 V lithium-ion pack uses a fully decoded chip that communicates with the camera's original charging circuit, so the standard USB input works normally.
How can I verify the 450 mAh capacity is delivering expected runtime after installation?
After two or three full charge cycles the camera's on-screen battery gauge should read full at the end of a charge and decrease steadily during thermal imaging use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
