Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00080686BTC
In stock
Cameron Sino 4000 1500mAh 9.6V battery charger
Replacement 9.6 V 1500 mAh Ni-Cd battery fits Makita 4000, 4093D, 4190D, 4300D and DA390D series tools
- Compatible with many Makita power-tool models
- 1500 mAh capacity at 9.6 V for long run-time
- Dimensions 182.20 x 48.80 x 30.70 mm, weight 396.0 g
- Built-in protection against overcharge, over-discharge and short circuit
- Replaces original Makita part numbers including 191681-2, 192533-0, 193889-4, 193890-9, 632007-4
Compatible Makita Tool Models
This replacement battery fits a wide range of Makita power tools including the 4000, 4093D, 4190D, 4300D, 5090D, 6000, 6012HD, 6092D, 6093D, 6094D, 6095D, 6096D, 6891D, 6900D, 8400, 8402D, 903D, DA390D, DA391D, T220D, UM1690D and UM1691D models. It also suits ML900 and ML902 flashlights.
Verify Your Original Part Number
Before ordering, check the part number on your existing battery against the supported list: 191681-2, 192533-0, 193889-4, 193890-9, 632007-4, 9000, 9001, 9002, 9033, 9034 and 9600. A mismatch means this unit will not fit your tool. Ensure the connector aligns correctly during installation.
Electrical Specifications and Protection
The pack delivers 9.6V with a 1500mAh capacity, providing 14.40Wh of energy. Built-in circuitry guards against overcharge, over-discharge, over-voltage and short circuits. A new battery reaches peak performance after two or three full charge and discharge cycles. Avoid using low-quality third-party adapters.
Highlights
- Compatible with many Makita power-tool models
- 1500 mAh capacity at 9.6 V for long run-time
- Dimensions 182.20 x 48.80 x 30.70 mm, weight 396.0 g
- Built-in protection against overcharge, over-discharge and short circuit
- Replaces original Makita part numbers including 191681-2, 192533-0, 193889-4, 193890-9, 632007-4
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 4000, 4093D, 4093DW, 4190D, 4190DB, 4190DW, 4190DWD, 4300D, 4300DW, 4390D, 4390DW, 5090D, 5090DW, 6000, 6012HD, 6012HDL, 6012HDW, 6092D, 6092DW, 6093D, 6093DW, 6094D, 6094DW, 6095D, 6095DQ, 6095DQ*, 6095DW, 6095DWBE, 6095DWDE, 6095DWE, 6095DWL-2, 6096D, 6096DW, 6096DWBE, 6096DWE, 6096DWLE, 6891D, 6891DW, 6900D, 6900DW, 8400, 8400D, 8400DW, 8400VD, 8400VDW, 8402DW, 8402VD, 8402VDW, 9000, 9001, 9002, 9033, 903D, 903DW, 9600, DA390D, DA390DW, DA391D, DA391DRA, DA391DW, DA391DWB, DA391DWD, DC910, DC9700a, KR23/43, ML900 Flash light, ML902 Flashlight, T220D, T220DW, UM1690D, UM1691D |
Questions about this item
Does the replacement battery for my Makita 4000 drill come with any tools or connectors, or do I need to buy them separately?
The battery is a direct replacement with a fully decoded chip that matches the original specifications. It fits the existing connector on your tool and requires no additional parts or tools for installation.
My original battery shows part number 193889-4. Is the 1500mAh 9.6V capacity the correct choice for this part number?
Yes, this 1500mAh 9.6V battery replaces Makita part numbers including 193889-4, 193890-9, 191681-2, 192533-0 and 632007-4. It matches the voltage and capacity specified for those original packs.
How long will the 14.40Wh capacity actually run my Makita 6095DW drill during typical use?
The 14.40Wh rating delivers the same energy as the original Makita battery for models like the 6095DW, 6095DQ and 6096DW. Runtime depends on the tool load, but the fully decoded chip ensures the drill's fuel gauge and protection circuits work identically to the factory pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
