Cameron & Co
Cameron & Co DS-CS-ESP600BX 3400mAh Li-ion Battery for Epson TM-P60
Replacement 7.4 V 3400 mAh lithium-ion battery for Epson TM-P60 mobile printers
- 3400 mAh Li-ion capacity powers extended mobile printing
- 4 V 25.16 Wh energy rating supports demanding receipt tasks
- Compatible with Epson TM-P60, TMP80, EHT-400C and NP-500H models
- Replaces original C32C831091 LIP-2500 NP-500 batteries directly
- Compact 70.30 x 38.30 x 20.70 mm design fits printer bay
Compatible Epson Mobile Printers
This lithium-ion battery replaces the original Epson EHT-400C power cell for TM-P60, TMP60, TMP80 and Mobilink series printers. It matches part numbers C32C831091, LIP-2500, NP-500 and NP-500H. The pack delivers 7.4 volts and 3400mAh capacity in a black housing measuring 70.30 by 38.30 by 20.70 millimetres.
Sustained Print Operation
Rated at 25.16 watt-hours, the cell supports extended mobile printing sessions away from mains power. Lithium-ion chemistry maintains a stable voltage curve through the discharge cycle, avoiding the sudden voltage drop that can interrupt a print job mid-receipt. The 3.4 ampere-hour rating reflects continuous drain rather than a peak burst figure.
Form-Factor Constraints
The fixed dimensions and connector layout limit use to the listed Epson mobile printers; it will not fit desktop or industrial models. Users needing higher capacity for multi-shift coverage must carry spare packs, as the physical envelope prevents a larger cell. The 7.4 volt output is set by the two-cell series configuration and cannot be adapted to other voltage rails.
Highlights
- 3400 mAh Li-ion capacity powers extended mobile printing
- 4 V 25.16 Wh energy rating supports demanding receipt tasks
- Compatible with Epson TM-P60, TMP80, EHT-400C and NP-500H models
- Replaces original C32C831091 LIP-2500 NP-500 batteries directly
- Compact 70.30 x 38.30 x 20.70 mm design fits printer bay
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-ESP600BX |
Questions about this item
Does the 7.4 V 3400 mAh lithium-ion pack generate noticeable heat during continuous mobile printing?
The 25.16 Wh cell is rated for standard mobile-printer loads and runs at normal operating temperature for this chemistry.
Must the Epson TM-P60 printer already be in my possession for this battery to function?
Yes — the pack is a direct replacement for Epson part numbers C32C831091, LIP-2500, NP-500 and NP-500H used in the TM-P60 and listed compatible models.
Will this 70.30 x 38.30 x 20.70 mm battery fit the older EHT-400 and M196D Mobilink units I still use?
The dimensions and 7.4 V 3400 mAh specification match the original batteries for EHT-400, EHT-400C, M196D and TMP80 printers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
