We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polished 316 stainless steel 90-degree elbow, half-inch trade size, ten inches long

CALBRITE

CALBRITE S60590EL00 1/2 in 90° Elbow 10 in 316 SS Conduit

SKU CH-CVQC-J35EQ

A 316 stainless steel 90-degree elbow with 10 in overall length and .62 in inside diameter for 1/2 in rigid metal conduit

  • TypeConduit & Raceways
  • 316 stainless steel resists corrosion in harsh environments
  • 90-degree turn routes rigid conduit around tight corners
  • 10-inch overall length suits standard trade-size runs
  • UL and CSA listed for code-compliant installations
  • Polished finish simplifies cleaning and inspection

1/2 in 90° 316 SS Elbow

This CALBRITE conduit elbow provides a 90-degree directional change for rigid metal conduit systems. It is manufactured from 316 stainless steel with a polished finish for corrosion resistance. The fitting suits trade size 1/2 in conduit and has an overall length of 10 in. It is UL and CSA listed for electrical installations.

Suited for corrosive or hygienic environments

Installers working in food processing, marine or chemical settings will benefit from the 316 alloy. The threaded connection orientation ensures a secure joint with compatible RMC. Builders needing a different bend radius, a larger trade size or a non-threaded coupling should select an alternative fitting.

Standards compliance supports inspection readiness

The elbow meets UL6A, ANSI C 80.1 and CSA C 22.2 No. 45.2-08 requirements. Full NEC compliance and CEC compliance simplify approval processes. The UL file number E230584 provides traceability for inspectors. No additional software or accessories are bundled with this fitting.

Highlights

  • 316 stainless steel resists corrosion in harsh environments
  • 90-degree turn routes rigid conduit around tight corners
  • 10-inch overall length suits standard trade-size runs
  • UL and CSA listed for code-compliant installations
  • Polished finish simplifies cleaning and inspection

Specifications

BrandCALBRITE
TypeConduit & Raceways

Questions about this item

What size rigid metal conduit do I need to already have for this 1/2 in trade size elbow to thread on correctly?

You need 1/2 in trade size rigid metal conduit with a 0.62 in inside diameter so the threaded ends of this 90 degree elbow engage properly.

Will this 316 stainless steel elbow corrode if I connect it to older galvanised rigid conduit in the same run?

The 316 stainless steel resists corrosion itself, but direct contact with dissimilar metals such as galvanised steel can create a galvanic cell; use a dielectric coupling or transition fitting between the two materials.

How can I confirm the elbow meets code after I install it in a 90 degree turn?

Verify the UL listing mark and file number E230584 are stamped on the fitting, and that the 90 degree bend aligns with the 10 in overall length and 1/2 in trade size marked on the body.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.