We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 5-port PWM fan hub splitter cable 37cm

CAFELE

CAFELE 5-Port PWM Fan Hub Splitter 37cm Power Splitter Cord

SKU CH-TNQ9-ZH9TZ

A 37 cm black sleeved cable that splits one motherboard PWM header into five 4-pin ports for case fans

  • TypeCase Fan
  • Connect up to five fans from one header
  • PWM speed control via CPU fan connection
  • Dedicated CPU fan port for monitoring
  • 37 cm sleeved cable keeps routing tidy
  • Black finish matches standard case aesthetics

Five-port PWM hub for fan expansion

This splitter adds five 4-pin PWM fan headers to a single motherboard CPU fan connector, letting builders run multiple case coolers when the board lacks enough ports. The first output is wired for the CPU cooler while the remaining four drive standard PWM case fans. All connections use the common 3-pin or 4-pin interface found on most modern fans. The hub is sold as a single unit in black.

Passive wiring draws power from the motherboard

The hub contains no active electronics, so fan speed control and monitoring travel straight through to the motherboard PWM circuit. Power for every attached fan comes from the same CPU fan header, meaning total current must stay within that header's rating. The 37cm all-black sleeved cable reaches typical mid-tower routing paths without excess slack. Noise and thermal behaviour depend entirely on the fans and motherboard firmware used.

Sleeved cable and labelled ports simplify cable

Each of the five male connectors is marked FAN1 through FAN5 plus a dedicated CPU position, reducing the chance of mis-plugging during assembly. The black mesh sleeve bundles the individual wires into a single loom that stays tidy behind the motherboard tray. No software, adapters or mounting hardware are included in the package. Builders needing more than five fans or a separate power source will require a different solution.

Highlights

  • Connect up to five fans from one header
  • PWM speed control via CPU fan connection
  • Dedicated CPU fan port for monitoring
  • 37 cm sleeved cable keeps routing tidy
  • Black finish matches standard case aesthetics

Specifications

TypeCase Fan

Questions about this item

How do I install the 5-port PWM fan hub splitter and which connector goes to the motherboard?

Connect the PWM port to the motherboard CPU fan header, then attach the CPU fan to the first socket and up to four additional PWM fans to the remaining FAN1 through FAN5 sockets.

What maintenance will the 37cm all-black sleeved power cable need over time?

Inspect the sleeving and connectors periodically for dust buildup or loose pins, and reseat any fan plugs that become unplugged during case moves or upgrades.

What limit appears first when running five fans continuously through the single motherboard header?

The motherboard header's current rating limits total fan draw, so combined fan amperage must stay within that header's specification to avoid shutdown or damage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.