We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat IDE-to-SATA adapter cord with black connectors

Cables Unlimited

Cables Unlimited R-FLT-7100 IDE to SATA adapter cord

SKU CH-8741-ZRBG7

Adapter converts IDE interface to connect SATA drives and optical devices

  • Connect SATA drives to legacy IDE controllers using a single-chip bridge
  • Translate SATA commands to ATA/ATAPI protocol for broad device compatibility
  • Use existing ATA motherboards with SATA HDDs and optical drives
  • Avoid the cost of a dedicated SATA host controller card
  • Model R-FLT-7100 delivers plug-in simplicity for IDE-to-SATA conversion

Cables Unlimited R-FLT-7100 IDE to SATA adapter

This Cables Unlimited R-FLT-7100 adapter connects Serial ATA storage devices to an existing IDE controller. It translates SATA mass storage commands into ATA/ATAPI protocol using a single chip solution. The cord lets you install SATA hard drives, DVD-RW, CD-ROM or CD-RW drives without adding a dedicated SATA host controller. It plugs directly into the IDE motherboard header for a simple upgrade path.

Suits owners of legacy systems with IDE ports

Builders maintaining older platforms can add modern SATA drives without replacing the motherboard. The adapter supports HDDs and optical drives that use the Serial ATA interface. It is not for users whose boards already provide native SATA connectors. It also does not serve anyone needing to connect an IDE drive to a SATA port, as the conversion works in one direction only.

Single chip SATA to ATA/ATAPI bridge

The onboard controller handles protocol translation between the SATA device and the ATA host. This specific bridge architecture determines which drive types are recognised by the older controller. No external power input is described in the specifications. The adapter function is defined entirely by this integrated conversion logic.

Highlights

  • Connect SATA drives to legacy IDE controllers using a single-chip bridge
  • Translate SATA commands to ATA/ATAPI protocol for broad device compatibility
  • Use existing ATA motherboards with SATA HDDs and optical drives
  • Avoid the cost of a dedicated SATA host controller card
  • Model R-FLT-7100 delivers plug-in simplicity for IDE-to-SATA conversion

Specifications

BrandCables Unlimited
ModelR-FLT-7100

Questions about this item

What type of motherboard connection is required to use the R-FLT-7100 IDE to SATA adapter?

The adapter plugs into an IDE interface on the motherboard to connect Serial ATA devices such as hard drives or optical drives.

Can the R-FLT-7100 adapter work with older ATA optical drives like a DVD-RW or CD-RW?

Yes, it translates SATA mass storage commands to the ATA/ATAPI protocol, allowing those legacy drives to function with the adapter.

How can I verify the R-FLT-7100 adapter is functioning correctly after installation?

The connected SATA drive should be detected by the system BIOS and appear as an available storage device in the operating system.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.