We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue bulk Cat6 UTP ethernet cable on spool, 1000 ft, 24 AWG

Cables To Go

Cables To Go C2G56031 Cat6 UTP network ethernet cable 1000 ft Blue 24 AWG

SKU CH-MYPB-13E44 MPN C2G56031

Cat6 UTP bulk cable for high-speed network runs, 1000 ft of 24 AWG solid copper with a CMR-rated jacket, meets ANSI/TIA-568.2-D 2018 at 550 MHz, TAA compliant, sustainable packaging cuts waste 40%

  • TypeNetwork Ethernet Cables
  • Cat6
  • Length1000 ft.
  • ColorBlue
  • TAA compliant for government projects
  • Meets ANSI/TIA-568.2-D (2018) standard
  • Supports data frequencies up to 550 MHz
  • CMR riser jacket for in-wall safety
  • Sustainable packaging cuts waste by 40%

Installation-ready Cat6 bulk cable

The C2G56031 is a 1000 ft Cat6 UTP bulk cable designed for horizontal network runs in commercial and residential projects. It meets the ANSI/TIA-568.2-D (2018) standard and supports data frequencies up to 550 MHz. The CMR-rated jacket permits in-wall installation, and TAA compliance qualifies it for government procurement. Builders who need pre-terminated patch cables or shielded cable for high-interference environments should choose a different product.

Sustainable packaging reduces waste

The cable ships in a slim package that cuts plastic and cardboard waste by 40 percent compared with conventional spools. This smaller footprint eases storage on site and allows the cable to pull smoothly through conduit without snagging. The 24 AWG conductors and unshielded twisted-pair construction keep the cable lightweight for long pulls. Installers who require a ruggedised outdoor jacket or armoured sheathing will not find those features here.

Consistent performance over full length

The cable maintains its rated 550 MHz bandwidth across the entire 1000 ft reel, supporting reliable Gigabit Ethernet throughput for sustained data transfers. The CMR riser rating ensures the jacket resists flame spread during extended operation in vertical shafts. TAA compliance and standards adherence remain valid for the life of the installation. Projects that demand 10 Gigabit Ethernet over the full 100 m channel should verify category 6A or higher specifications instead.

Highlights

  • TAA compliant for government projects
  • Meets ANSI/TIA-568.2-D (2018) standard
  • Supports data frequencies up to 550 MHz
  • CMR riser jacket for in-wall safety
  • Sustainable packaging cuts waste by 40%

Specifications

BrandC2G
ModelC2G56031
TypeNetwork Ethernet Cables
Cat6
Length1000 ft.
ColorBlue
Shipping weight17.08 kg
Package size381 × 363 × 216 mm

Questions about this item

How do I pull the 1000 ft Cat6 cable through walls without snagging?

The slim sustainable packaging reduces plastic and cardboard waste by 40% and is designed for a smooth cable-pulling experience during horizontal installations.

Will the CMR-rated jacket need replacement after installation?

The CMR riser-rated jacket meets ANSI/TIA-568.2-D (2018) for in-wall safety and is intended to last the life of the permanent installation.

At what frequency does signal loss become noticeable on this 24 AWG cable?

The cable supports a data frequency range up to 550 MHz per the ANSI/TIA-568.2-D standard, so attenuation increases beyond that limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.