We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
C2G USB 3.2 Superbooster switch extender unit in black finish

Cables To Go

Cables To Go C2G54262 USB 3.2 Superbooster Switch Extender 100m 640MB/s

SKU CH-WWBV-9W93T MPN C2G54262

Extends USB 3.2 signals up to 100 m at 640 MB/s over a single CAT6a cable with input switching

  • TypeSwitch Extender
  • Max Extend Distanceup to 100m (328ft)
  • Extends USB 3.2 signals up to 100 metres using a single CAT6a cable
  • Delivers 640 MB/s throughput for high-bandwidth peripherals like PTZ cameras
  • Switches between two host inputs without re-cabling
  • Works with USB 2.0 and 1.1 devices for legacy compatibility
  • TAA-compliant design suited for government and corporate installations

USB 3.2 Superbooster Switch Extender

The C2G C2G54262 extends USB 3.2 Gen 1 signals up to 100m over a single CAT6a U/FTP cable. It provides four downstream ports with input switching and remains backward compatible with USB 2.0 and 1.1 devices. The extender suits conference rooms, auditoriums and huddle spaces needing reliable long-distance peripheral connectivity.

Practical limits of USB 3.2 Gen 1 over CAT6a

Maximum data transfer rate reaches 640 MB/s at the full 100m (328ft) distance. Signal integrity depends on using certified CAT6a U/FTP cabling; lesser grades will reduce the achievable range or throughput. The four-port switch shares the 5Gbps upstream bandwidth among all active peripherals.

Installation and common issues

Connect the transmitter to the host, the receiver to the peripherals, and link both with a single CAT6a run — no drivers are required. Most problems stem from using patch cables below CAT6a spec or exceeding the 100m limit, which causes drop-outs or speed negotiation failures. Ensure the power adapter is firmly seated on the receiver unit to avoid intermittent port behaviour.

Highlights

  • Extends USB 3.2 signals up to 100 metres using a single CAT6a cable
  • Delivers 640 MB/s throughput for high-bandwidth peripherals like PTZ cameras
  • Switches between two host inputs without re-cabling
  • Works with USB 2.0 and 1.1 devices for legacy compatibility
  • TAA-compliant design suited for government and corporate installations

Specifications

BrandC2G
ModelC2G54262
Part NumberC2G54262
TypeSwitch Extender
Max Extend Distanceup to 100m (328ft)
Shipping weight1.04 kg
Package size251 × 211 × 84 mm

Questions about this item

Should I choose a shorter or the 100m version for my room size?

The extender reaches up to 100m (328ft) over a single CAT6a U/FTP cable, so select the length that matches your actual cable run.

What does the 640 MB/s rate mean when I plug in a webcam and keyboard?

It delivers USB 3.2 Gen 1 speeds up to 5Gbps, enough for 4K webcams, PTZ cameras, microphones and other peripherals without compression.

Which cable standard does the extender use and what distance does it cap at?

It runs over CAT6a U/FTP and caps at 100m (328ft) for the full 5Gbps bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.