We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6a shielded Ethernet patch cable 3 ft .91 m with snagless connectors

Cables To Go

Cables To Go 640 network ethernet cable 3 ft .91 m Cat6a shielded snagless gray

SKU CH-VKBQ-3K74A MPN 640

Shielded Cat6a patch cable with snagless connectors, tested to ANSI/TIA 568 C.2 for 10 Gigabit Ethernet

  • TypeNetwork Patch Cable
  • Length3 ft.
  • ColorGray
  • Supports 10 Gigabit speeds with Cat6a performance
  • Shielded construction blocks noise and electromagnetic interference
  • Snagless boots protect the latch during repeated plugging
  • Each pair bonded to maintain twist spacing to the connector
  • Tested to ANSI/TIA 568 C.2 Cat6a component requirements

3 ft Cat6a Shielded Patch Cable

This Cables To Go 640 network ethernet cable is a 3-foot Cat6a shielded patch cable with snagless connectors. It is built for 10GBase-T equipment such as network adapters, switches, routers, DSL or cable modems and patch panels. The gray jacket provides simple visual identification in a rack or wall plate. Each cable carries an individual length label for quick inventory checks.

Suited for short 10G links, not long runs

Installers terminating 10 Gigabit connections inside a cabinet or at a workstation will find the snagless boots and bonded-pair construction useful. The bonded pairs preserve twist spacing to the termination point, reducing impedance and structural return loss. Buyers needing longer horizontal runs between floors or buildings should look at bulk cable instead of this short patch lead.

ANSI/TIA 568 C.2 Cat6a component tested

Every patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements. Individual pairs are bonded together to maintain twist spacing right up to the plug. High-quality cable and plugs minimise Near-End Crosstalk levels. Shielding protects the 10 Gigabit connection from noise and electromagnetic interference.

Highlights

  • Supports 10 Gigabit speeds with Cat6a performance
  • Shielded construction blocks noise and electromagnetic interference
  • Snagless boots protect the latch during repeated plugging
  • Each pair bonded to maintain twist spacing to the connector
  • Tested to ANSI/TIA 568 C.2 Cat6a component requirements

Specifications

BrandC2G
ModelA7293730
TypeNetwork Patch Cable
Length3 ft.
ColorGray
Shipping weight0.06 kg
Package size125 × 94 × 15 mm

Questions about this item

Will the snagless boots on this 640 cable wear out and need replacing after many insertions?

The snagless design protects the latch during insertion and removal, reducing strain on the connector tab so the cable can withstand repeated plugging and unplugging without latch breakage.

What limits the bandwidth of this 640 Cat6a cable when running 10GBase-T continuously?

The cable is tested to ANSI/TIA 568 C.2 Cat6a component requirements, so the 10 Gigabit per second rating over the full 3 ft length is the sustained limit.

Does the shielded construction of this 640 cable make it run hotter or draw more power than an unshielded patch lead?

Shielding is passive and adds no power draw or heat; it only blocks external electromagnetic interference to keep the 10GBase-T signal stable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.