We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cables To Go

Cables To Go 50633 hdmi cable 25 ft 60Hz CL2 Ethernet

SKU CH-Y3BR-JF37R MPN 50633

A 25 ft CL2-rated HDMI cable with Ethernet for in-wall 4K 60 Hz connections

  • TypeHDMI
  • ColorBlack
  • Length25 ft
  • Cable Length0.5 ft.
  • Connector Number1
  • Connect From1 x HDMI
  • Supports 4K Ultra HD at 60Hz with Ethernet channel
  • CL2-rated jacket approved for in-wall installation
  • Gold-plated connectors resist corrosion for lasting signal quality
  • Double foil-and-braid shielding blocks interference for clear picture
  • 25 ft length connects devices across larger rooms

25 ft in-wall HDMI cable

This 25-foot HDMI cable carries 4K UHD video at 60 Hz with Ethernet support in a single run. Male Type A connectors on both ends suit source and display devices without adapters. The CL2-rated jacket meets in-wall fire requirements for commercial and residential installs. Gold-plated contacts resist corrosion for reliable long-term signal transfer.

Shielded construction for clean signal

Foil and braid shielding blocks electromagnetic interference that can degrade picture and audio quality. The cable operates at the specified 60 Hz refresh rate without active electronics or external power. Passive design means no driver installation or firmware updates are required. Length is fixed at 25 feet with no extension capability built in.

Fixed-length install considerations

At 25 feet the cable suits room-scale runs but cannot be shortened or lengthened on site. Male-to-male ends limit direct connection to female ports only; gender changers or couplers add extra junctions. CL2 rating covers in-wall routing but not plenum spaces or outdoor exposure. Black jacket blends with typical AV rack and wall-plate aesthetics.

Highlights

  • Supports 4K Ultra HD at 60Hz with Ethernet channel
  • CL2-rated jacket approved for in-wall installation
  • Gold-plated connectors resist corrosion for lasting signal quality
  • Double foil-and-braid shielding blocks interference for clear picture
  • 25 ft length connects devices across larger rooms

Specifications

BrandC2G
Model50633
TypeHDMI
ColorBlack
Length25 ft
Cable Length0.5 ft.
Connector Number1
Connect From1 x HDMI
Connect To1 x HDMI
Connector DetailConnector on First End:1 x HDMI (Type A) Male Audio/Video
Connector on Second End:1 x HDMI (Type A) Male Audio/Video
Shipping weight0.90 kg
Package size218 × 208 × 3 mm

Questions about this item

How do I run the 25 ft CL2 cable through a wall cavity and what step do installers often miss?

Pull the cable gently to avoid kinking the foil and braid shield, then verify the CMG jacket meets local fire code before closing the wall — skipping the code check is the common mistake.

What part of this 50633 cable will need attention or replacement first?

The gold-plated HDMI Type A male connectors can loosen or oxidise after repeated plugging; reseat or replace the cable if signal dropouts appear.

What limit appears first when the 60 Hz 4K signal runs continuously over the full 25 ft length?

Signal attenuation over the 25 ft distance is the first limit; the double shielding reduces noise but cannot eliminate high-frequency loss at sustained 60 Hz 4K bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.