We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black VGA cable with two 15-pin HD-15 male connectors, 10 ft long

Cables To Go

Cables To Go 50213 VGA Cable M/M 10 ft 2048x1536

SKU CH-R00V-7HY52 MPN 50213

A 10 ft VGA cable with male HD-15 connectors on both ends, CMG-rated for in-wall installation and supporting up to 2048x1536 resolution

  • TypeCable Connectors
  • ColorBlack
  • Length10 ft
  • Connector Number1
  • Connector DetailConnector on First End:HD-15 Male VGA Connector on Second En
  • SpecificationsDevice Supported:Video Device
  • CMG-rated jacket meets in-wall fire safety codes
  • Supports 2048 x 1536 resolution for sharp video
  • All 15 pins wired for DDC2 and EDID communication
  • Low-profile connectors fit tight spaces behind equipment
  • 10 ft length covers typical desktop-to-display runs

VGA cable for in-wall video runs

This 10 ft male-to-male VGA cable carries analog video between a source and a display. The CMG-rated jacket meets in-wall fire codes, so installers can route it through walls or ceilings. All 15 pins are connected to pass DDC2 and EDID data for automatic display configuration. It suits offices, classrooms and digital-signage projects needing a permanent link.

Resolution support under continuous use

The cable supports up to 2048x1536 resolution across its full 10 ft length. Signal integrity is maintained during extended sessions because every conductor is wired and the CMG jacket resists heat buildup inside walls. No active electronics are present, so performance does not degrade with time or temperature cycling. The passive design delivers a stable picture for as long as the source and display remain powered.

Straightforward installation with low-profile ends

Low-profile HD-15 connectors fit behind equipment racks and tight wall plates without blocking adjacent ports. Screw-down thumbscrews secure each end by hand, requiring no tools. The only common issue arises if the installer exceeds the 10 ft reach or bends the cable tighter than its jacket allows, which can stress the internal conductors.

Highlights

  • CMG-rated jacket meets in-wall fire safety codes
  • Supports 2048 x 1536 resolution for sharp video
  • All 15 pins wired for DDC2 and EDID communication
  • Low-profile connectors fit tight spaces behind equipment
  • 10 ft length covers typical desktop-to-display runs

Specifications

BrandC2G
Model50213
TypeCable Connectors
ColorBlack
Length10 ft
Connector Number1
Connector DetailConnector on First End:HD-15 Male VGA
Connector on Second End:HD-15 Male VGA
SpecificationsDevice Supported:Video Device
FeaturesCable Type: VGACable Length: 10 ftConnector on First End: 15-pin HD-15 Male VGAConnector on Second End: 15-pin HD-15 Male VGADevice Supported: Video DeviceLimited Warranty: Lifetime
Shipping weight0.33 kg
Package size216 × 178 × 25 mm

Questions about this item

Does the 10 ft length add any signal noise when the cable runs all day?

The cable is a passive copper assembly with no active electronics, so it generates no heat or electrical noise during continuous operation.

What must the buyer already own for this HD-15 male-to-male cable to work?

A video source and a display device each equipped with a 15-pin HD-15 female VGA port.

How does the all-15-pin wiring behave with older monitors that rely on DDC2 or EDID?

All 15 pins are wired, allowing the cable to carry DDC2 and EDID signals that older monitors use for automatic configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.