We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black VGA cable with HD-15 male connectors at both ends

Cables To Go

Cables To Go 50212 VGA cable 6 ft

SKU CH-F1AB-1266Y

A 6 ft VGA cable with HD-15 male connectors, CMG-rated for in-wall use, supporting up to QXGA 2048x1536 resolution over distances up to 150 ft with all 15 pins wired for EDID communication

  • Supports QXGA 2048×1536 resolution for sharp video
  • All 15 pins wired for DDC2 and EDID communication
  • CMG-rated jacket approved for in-wall installation
  • Low-profile rounded connectors fit tight spaces easily
  • Designed for reliable video over 150 ft distance

C2G Select VGA Video Cable 50212

This VGA cable connects a source device to a display using HD-15 male connectors on both ends. It measures six feet in length and features a black CMG-rated jacket suitable for in-wall installation. The low-profile rounded connectors allow easy routing in tight spaces such as projector mount poles. All fifteen pins are fully wired for complete signal integrity.

Sustained signal quality over distance

The cable supports video resolutions up to QXGA at 2048x1536 and is designed to maintain high-resolution performance over long distances up to 150 feet. Full 15-pin wiring provides support for DDC2 and EDID communication, ensuring the source outputs the optimal resolution for the connected display. This construction prevents signal degradation during extended use across the full rated length.

Passive operation with durable jacket

As a passive copper cable it draws no power and produces no noise or heat during normal operation. The CMG-rated jacket meets fire-safety requirements for in-wall commercial applications while protecting the internal conductors. The rounded connector profile reduces strain on ports and simplifies cable management in confined installation environments.

Highlights

  • Supports QXGA 2048×1536 resolution for sharp video
  • All 15 pins wired for DDC2 and EDID communication
  • CMG-rated jacket approved for in-wall installation
  • Low-profile rounded connectors fit tight spaces easily
  • Designed for reliable video over 150 ft distance

Specifications

BrandCables To Go
Model50212

Questions about this item

Does the 50212 cable generate any heat or noise when used continuously for long periods?

No, this passive VGA cable has no active electronics, so it produces no heat or audible noise during all-day use.

What connectors must the source and display already have for the 50212 cable to work?

Both devices need an HD-15 (VGA) female port, because the cable terminates in HD-15 male plugs on each end.

Will the 50212 cable correctly communicate display capabilities to an older graphics card that relies on EDID?

Yes, all 15 pins are wired to carry DDC2 and EDID signals, so legacy hardware can still read the monitor's supported resolutions up to 2048x1536.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.