We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6 bulk ethernet cable on spool, 1000 ft, CM-rated, stranded 24AWG copper, foot-marked jacket, no-snag pull box

Cables To Go

Cables To Go 43406 Cat6 1000 ft network ethernet cable

SKU CH-5TXS-F0Z48 MPN 43406

Bulk Cat6 UTP cable with 24 AWG stranded copper conductors, 1000 ft pull-box, CM-rated jacket foot-marked for easy measurement, tested to 400 MHz

  • TypeNetwork Ethernet Cables
  • Cat6
  • Length1000 ft.
  • ColorGray
  • Features24AWG, stranded, bare copper conductors In-wall, CM-Rated, j
  • Stranded 24AWG copper stays flexible during long pulls
  • 1000 ft continuous length reduces joins in large installs
  • CM-rated jacket approved for in-wall routing
  • Foot-marked jacket shows remaining cable at a glance
  • No-snag box feeds cable smoothly without tangles

Bulk Cat6 cable for custom runs

This Cables To Go 43406 is a 1000 ft bulk roll of Cat6 unshielded twisted-pair cable with stranded 24AWG bare copper conductors. The grey CM-rated jacket is approved for in-wall installation and meets ANSI/TIA-568-C.2 specifications with testing up to 400 MHz. A no-snag dispensing box and foot-marked jacket simplify measuring and pulling during installation.

Installers needing flexible in-wall cable

The stranded construction makes this cable easy to bend and terminate for custom patch leads, and the box design supports smooth dispensing on site. Buyers who require a shielded cable for high-interference environments should look at a different product. Anyone needing a pre-terminated patch cord rather than bulk wire will also need an alternative.

Tested to 400 MHz for high-speed transmission

The cable is verified at frequencies up to 400 MHz, which determines its suitability for gigabit and multi-gigabit Ethernet links. This single figure is the key reference when confirming the cable matches the performance requirements of the planned network.

Highlights

  • Stranded 24AWG copper stays flexible during long pulls
  • 1000 ft continuous length reduces joins in large installs
  • CM-rated jacket approved for in-wall routing
  • Foot-marked jacket shows remaining cable at a glance
  • No-snag box feeds cable smoothly without tangles

Specifications

BrandC2G
Model43406
TypeNetwork Ethernet Cables
Cat6
Length1000 ft.
ColorGray
Features24AWG, stranded, bare copper conductors
In-wall, CM-Rated, jacket
No-snag box makes for easy pulling
Foot marked to easily identify remaining cable
Shipping weight11.79 kg
Package size400 × 370 × 260 mm

Questions about this item

What conduit size is needed for the 24AWG stranded conductors in this 1000 ft Cat6 UTP cable?

The 24AWG stranded bare copper conductors with CM-rated jacket fit standard low-voltage conduit; the no-snag box lets you pull the full 1000 ft length without kinking.

How do I pull the cable from the no-snag box without twisting the pairs?

Feed the cable straight out of the box opening while keeping the box stationary; the foot-marked jacket lets you track the 1000 ft length as you go.

When should I replace the cable if the CM-rated jacket shows wear?

Inspect the gray jacket at each foot mark; replace any section where the CM rating is compromised or the stranded conductors are exposed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.