We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6a Ethernet cable with RJ45 connectors, 200 ft length, snagless design, plenum rated

Cables To Go

Cables To Go 43176 Cat6a network ethernet cable 200 ft blue

SKU CH-ERAR-737PA MPN 43176

A 200 ft Cat6a patch cable with discontinuous shielding, HDBaseT certification, and snagless RJ-45 connectors for 10 Gigabit and PoE applications

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ-45 Male
  • Connector BRJ-45 Male
  • Length200 ft.
  • ColorBlue
  • Supports 10 Gigabit data transmission over 200 ft
  • HDBaseT Class A and B certified for A/V extenders
  • Discontinuous shielding avoids grounding requirements
  • Plenum CMP-rated jacket meets fire-safety codes
  • Snagless design suits high-density patch panels

Ideal for HDBaseT and PoE installs

This Cables To Go 43176 Cat6a cable is built for HD A/V applications such as HDBaseT extenders and Power over Ethernet type 1-4 equipment. The 200 ft blue run meets ANSI/TIA 568 C.2 Cat6a channel requirements and is HDBaseT Class A and B certified. Snagless boots protect the RJ-45 connectors in dense patch panels. Discontinuous shielding removes the need for separate grounding.

Fits high-density pathways without grounding

The nominal .265 in diameter allows tighter bundles and a smaller bend radius than typical Cat6a products, freeing space in crowded conduits and cabinets. Discontinuous metallised shielding attenuates emissions without requiring a ground connection at each end. Plenum CMP rating lets the cable run in air-handling spaces. RJ-45 male connectors on both ends plug directly into switches, extenders or PoE devices.

Handles 10 Gigabit up to the full 200 ft

Designed to support 10 Gigabit data transmission across the entire 60.96 m length, the cable also carries PoE currents up to the IEEE 802.3bt draft D1.2 limits. Buyers needing longer single runs or fibre-grade bandwidth will need a different medium. The Cat6a rating does not extend beyond the specified channel length.

Highlights

  • Supports 10 Gigabit data transmission over 200 ft
  • HDBaseT Class A and B certified for A/V extenders
  • Discontinuous shielding avoids grounding requirements
  • Plenum CMP-rated jacket meets fire-safety codes
  • Snagless design suits high-density patch panels

Specifications

BrandC2G
Model43176
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ-45 Male
Connector BRJ-45 Male
Length200 ft.
ColorBlue
FeaturesDiscontinuous shielding avoids need for grounding
HDBaseT Class A and B certified
Designed to support up to 10 Gigabit data transmission
Snagless design for high density applications
Shipping weight3.22 kg
Package size410 × 405 × 85 mm

Questions about this item

What is the maximum data rate this 200 ft Cat6a cable is designed to support?

The cable is designed to support up to 10 Gigabit data transmission over the full 200 ft length.

Does the discontinuous shielding generate any heat or noise during continuous PoE use?

As a passive copper cable it produces no noise and negligible heat; the discontinuous shielding avoids grounding without active components.

What connectors must the existing equipment have for this cable to plug in directly?

Both ends use standard RJ-45 male connectors, so each device needs an RJ-45 female port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.