Cables To Go
Cables To Go 41193 HDMI cable 50 ft plenum CMP-rated
A 50 ft plenum-rated HDMI cable with gold-plated connectors and braided shielding for 1080p commercial installs
- TypeCable Connectors
- ColorBlack
- Length50 ft.
- Cable Length50 ft.
- Connector Number1
- Connector DetailConnector on First End:1 x HDMI Male Digital Audio/Video Con
- Supports 1080p resolution for clear HD video
- Plenum CMP-rated jacket meets fire safety codes for in-wall runs
- Gold-plated connectors resist corrosion for reliable signal transfer
- Braided shielding blocks EMI and RFI interference
- 50 ft length suits large rooms and commercial installs
Pro Series HDMI 50 ft plenum
This C2G 41193 cable carries 1080p video and 1920 x 1200 computer resolutions over a 50 ft plenum-rated run. Gold-plated HDMI male connectors on both ends resist corrosion for reliable signal transfer. The CMP-rated jacket meets fire-safety codes for air-handling spaces in schools, hospitals and commercial buildings. Shielded 24 AWG copper conductors block EMI and RFI interference.
Replaces non-plenum HDMI runs
Standard PVC-jacketed HDMI cables cannot be installed in plenum air spaces without conduit. This cable removes that restriction for new construction or retrofit projects where fire codes demand CMP-rated materials. The jump is worth it whenever an inspector requires low-smoke, flame-resistant cabling in ceiling or floor plenums. It also upgrades unshielded links that suffer noise on long 50 ft paths.
Fits commercial A/V installs
The male-to-male layout connects source and display directly without gender changers or wall plates. Gold plating and molded strain relief protect the terminations during pulls through tight conduit or cable trays. Braided shielding preserves picture and audio quality across the full 15.24 m distance. Installers gain a single-cable solution that satisfies both signal and building-code requirements.
Highlights
- Supports 1080p resolution for clear HD video
- Plenum CMP-rated jacket meets fire safety codes for in-wall runs
- Gold-plated connectors resist corrosion for reliable signal transfer
- Braided shielding blocks EMI and RFI interference
- 50 ft length suits large rooms and commercial installs
Specifications
| Brand | C2G |
|---|---|
| Model | 41193 |
| Type | Cable Connectors |
| Color | Black |
| Length | 50 ft. |
| Cable Length | 50 ft. |
| Connector Number | 1 |
| Connector Detail | Connector on First End:1 x HDMI Male Digital Audio/Video Connector on Second End:1 x HDMI Male Digital Audio/Video |
| Features | Cable Type: HDMICable Length: 50 ftConnector on First End: 1 x HDMI Male Digital Audio/VideoConnector on Second End: 1 x HDMI Male Digital Audio/VideoConnector Plating: Gold PlatedShielding: YesColor: BlackWeight (Approximate): 2.61 kgGreen Compliant: YesGreen Compliance Certificate/Authority: RoHSLimited Warranty: Lifetime |
| Shipping weight | 2.02 kg |
| Package size | 254 × 254 × 102 mm |
Questions about this item
What plenum rating does the CMP-rated jacket on this 50 ft HDMI cable carry for in-wall installation?
The cable uses a CMP-rated jacket that is low-smoke and highly fire-resistant, meeting requirements for plenum air spaces where no metal conduit is used.
How do I install this 50 ft plenum HDMI cable without damaging the gold-plated connectors during a long pull?
Pull the cable by the jacket, not the connectors, and avoid sharp bends; the molded strain-relief boots protect the 24 AWG conductors but the HDMI heads can still be stressed if yanked.
When should I expect to replace this plenum HDMI cable if it stays in a fixed commercial installation?
The 24k gold-plated connectors resist corrosion and the braid shield blocks EMI, so in a static install the cable typically lasts the life of the AV system unless physically damaged.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



