We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3.5mm stereo audio cable, 35 ft, plenum CMP jacket, low-profile male connectors, 0.25 in diameter

Cables To Go

Cables To Go 40517 3.5mm Stereo Audio Cable M/M Plenum CMP-Rated 35 ft 10.66 m Low Profile Connectors

SKU CH-X68W-9651N MPN 40517

Plenum CMP-rated 3.5 mm stereo audio cable with low-profile male connectors, 26 AWG copper conductors and foil shielding for in-wall installation

  • TypeOthers
  • ColorBlack
  • Length35 ft
  • Connector Number2
  • Terminal GenderMale to Male
  • ConductorCopper Conductor
  • Plenum CMP-rated jacket meets fire-safety codes for in-wall runs
  • Low-profile 1.5 inch connectors fit tight wall-plate boxes
  • 25 inch cable diameter eases routing through plenum spaces
  • 26 AWG copper conductor with foil shield delivers clean audio
  • 35 foot length (10.66 m) suits commercial and educational installs

Plenum-rated stereo audio cable

This 35 ft 3.5 mm stereo cable carries a CMP-rated plenum jacket for installation in air-handling spaces. It uses solid 26 AWG copper conductors with foil shielding to protect audio signals from interference. Low-profile connectors and a 0.25 in diameter help the cable fit through tight wall plates and conduit.

Installers needing plenum compliance

The cable suits commercial and educational AV runs that must meet plenum fire-safety requirements. It is not for buyers who need unbalanced mono connections or a different connector gender than male-to-male. Installers requiring longer runs without signal boosters should look at alternative solutions.

Straightforward in-wall installation

The 1.5 in connector depth and small cable diameter reduce the clearance needed inside wall boxes and plenum spaces. Solid conductors keep the cable stiff enough to push through conduit but can kink if bent sharply around corners. Foil shielding remains effective only when the jacket stays intact during the pull.

Highlights

  • Plenum CMP-rated jacket meets fire-safety codes for in-wall runs
  • Low-profile 1.5 inch connectors fit tight wall-plate boxes
  • 25 inch cable diameter eases routing through plenum spaces
  • 26 AWG copper conductor with foil shield delivers clean audio
  • 35 foot length (10.66 m) suits commercial and educational installs

Specifications

BrandC2G
Model40517
TypeOthers
ColorBlack
Length35 ft
Connector Number2
Terminal GenderMale to Male
ConductorCopper Conductor
SpecificationsConnector 1: 3.5mm Stereo Male
Connector 2: 3.5mm Stereo Male
Weight: 0.56 lbs.
CMP-rated plenum jacket; low profile audio connectors and small cable diameter enable easier in-wall installation.
FeaturesAudio / video installations in educational and commercial settings often require plenum-rated cabling.
Our plenum-rated line was engineered to overcome common challenges faced by installers.
Low-profile connectors (1.5in total depth) save valuable space and enable easier in-wall connections.
And our small-diameter (0.25in) cable design further reduces the space and clearance required to run the necessary cabling through walls and plenum air spaces.
This cable is constructed from 24 AWG twisted pair wire with foil shielding to ensure signal integrity in your installation.
CMP rating p
Shipping weight0.32 kg
Package size152 × 152 × 25 mm

Questions about this item

What devices need a 3.5mm stereo jack to use this 35 ft cable?

Any source or speaker with a 3.5mm stereo socket — phones, laptops, mixers, powered monitors — will accept the male plugs on both ends.

Can the 1.5 inch deep low-profile connectors fit behind existing wall plates that already hold thicker cables?

The slim 1.5 inch connector depth and 0.25 inch cable diameter are designed for tight wall-plate boxes, so they usually sit alongside older bulkier runs without forcing the plate.

How do I confirm the 26 AWG foil-shielded conductors are delivering clean audio after the in-wall pull?

Play a quiet passage and listen for hum or hiss; the foil shield and solid copper conductors should keep the signal silent, confirming the plenum-rated run is intact.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.