We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 35 ft stereo audio cable with low-profile 3.5 mm male connectors at both ends

Cables To Go

Cables To Go 40108 3.5mm Stereo Audio Cable 35 ft In-Wall CMG Low Profile M/M

SKU CH-MXF7-AXWE7 MPN 40108

A 35 ft in-wall CMG-rated stereo cable with 3.5 mm male connectors, foil shielding and 1.4 in low-profile plugs for tight gang-box installations

  • TypeOthers
  • ColorBlack
  • Length35 ft.
  • Connector Number2
  • Connector DetailConnector 1: 3.5mm Male Connector 2: 3.5mm Male
  • ShieldingYes
  • CMG-rated jacket approved for in-wall installation in commercial and educational spaces
  • Low-profile connectors only 1.4 inches deep fit tight gang boxes and wall plates
  • Foil shielding blocks noise interference for clean stereo audio signal
  • 22 AWG twisted-pair construction with drain wire maintains signal integrity over 35 ft
  • Broad 3.5 mm male-to-male compatibility with phones, tablets, laptops and desktop PCs

35 ft In-Wall Stereo Audio Cable

This 35 ft 3.5 mm stereo cable is built for in-wall runs in schools, offices and homes. Its CMG-rated jacket satisfies common building-code requirements for general-purpose communications wiring. Low-profile connectors keep the termination depth to 1.4 inches so the cable fits cleanly behind wall plates and in shallow gang boxes.

CMG-Rated Jacket for In-Wall Use

The single specification that decides suitability is the CMG rating, which also covers FT4, CM, CL3, CL2, CMX, CL3X and CL2X listings. Without this rating the cable cannot be legally installed inside walls in many jurisdictions, so verify local code before purchase.

Foil-Shielded 22 AWG Construction

Twisted-pair 22 AWG conductors with a drain wire and full foil shielding reject electromagnetic interference over the full 35 ft length. The shielding maintains signal integrity during sustained playback, preventing the noise buildup that can appear on unshielded runs after extended use.

Highlights

  • CMG-rated jacket approved for in-wall installation in commercial and educational spaces
  • Low-profile connectors only 1.4 inches deep fit tight gang boxes and wall plates
  • Foil shielding blocks noise interference for clean stereo audio signal
  • 22 AWG twisted-pair construction with drain wire maintains signal integrity over 35 ft
  • Broad 3.5 mm male-to-male compatibility with phones, tablets, laptops and desktop PCs

Specifications

BrandC2G
Model40108
TypeOthers
ColorBlack
Length35 ft.
Connector Number2
Connector DetailConnector 1: 3.5mm Male
Connector 2: 3.5mm Male
ShieldingYes
SpecificationsWeight: 0.634lbs.
Jacket Rating: In Wall
FeaturesAudio installations in educational and commercial settings often require in-wall rated cable. Our CMG-rated line was specifically engineered to meet this requirement while overcoming common challenges faced by installers in these environments. Low-Profile connectors (1.41in total depth) save valuable space in the gang box.
This cable is constructed from 22 AWG twisted pair wire and drain wire. The entire cable is foil shielded to ensure signal integrity.
CMG rated cables meet many NEC requirements for Communications Cables General Purpose In Wall Use. Our cables meet the following ra
Shipping weight0.91 kg
Package size178 × 133 × 23 mm

Questions about this item

What does the 35 ft length mean for routing inside a wall?

The 35 ft run gives enough slack to pull the cable between floors or across a room while leaving service loops at each end for wall-plate terminations.

What does the CMG jacket rating cap in practice?

The CMG rating meets NEC general-purpose in-wall requirements and also covers FT4, CM, CL3, CL2, CMX, CL3X and CL2X listings for commercial and residential installs.

How much depth do the 1.4 in low-profile connectors need inside a gang box?

Each 3.5 mm male plug measures 1.41 in total depth, so they fit in standard wall-plate boxes without forcing the cover plate off the wall.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.