We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3.5mm stereo plug splitting to two RCA male plugs, 12 ft molded cable

Cables To Go

Cables To Go 39943 3.5mm to 2 RCA Y-Cable 12 ft

SKU CH-F7P2-554X0 MPN 39943

Splits a 3.5 mm stereo jack into two RCA plugs over 12 ft with nickel-plated, molded connectors and 26 AWG shielded copper for clear audio

  • TypeStereo Cables
  • ColorBlack
  • Length12 ft.
  • Connector Number3
  • Connector DetailConnector on First End: 1 x Mini-phone Male Stereo Audio Con
  • Terminal GenderMale to Male
  • Bi-directional 3.5 mm to dual RCA for flexible hookups
  • Nickel-plated contacts and molded strain relief for lasting connections
  • 26 AWG spiral-wrapped copper shield blocks EMI/RFI noise
  • 12 ft length reaches across rooms without extra extenders
  • Works with phones, tablets, laptops and home audio systems

Stereo Y-adapter for 3.5mm and RCA

This cable converts a single 3.5mm stereo connection to two RCA male plugs or works in reverse to combine dual RCA sources into a 3.5mm input. It suits anyone linking a phone, tablet or laptop to a home audio system, powered speakers or an older amplifier that only accepts RCA. The 12 ft length gives flexible placement across a room without stretching.

Molded nickel-plated connectors and copper shielding

Fully molded strain relief on all three male ends protects the solder joints during frequent connects and disconnects. Nickel-plated contacts resist corrosion for reliable conductivity over time. The 26 AWG spiral-wrapped copper shield blocks EMI and RFI noise that can degrade analogue audio, so the signal stays clean from source to destination.

Handles stereo line-level signals up to 12 ft

Designed for consumer line-level outputs such as headphone jacks, docking stations or media players, it delivers clear left and right channels through copper conductors. It is not suited for microphone-level inputs, balanced professional gear or runs longer than the supplied length, where signal loss and interference become more likely.

Highlights

  • Bi-directional 3.5 mm to dual RCA for flexible hookups
  • Nickel-plated contacts and molded strain relief for lasting connections
  • 26 AWG spiral-wrapped copper shield blocks EMI/RFI noise
  • 12 ft length reaches across rooms without extra extenders
  • Works with phones, tablets, laptops and home audio systems

Specifications

BrandC2G
Model39943
TypeStereo Cables
ColorBlack
Length12 ft.
Connector Number3
Connector DetailConnector on First End: 1 x Mini-phone Male Stereo Audio
Connector on Second End: 2 x RCA Male Stereo Audio
Terminal GenderMale to Male
SpecificationsConnector Plating: Nickel Plated
Features: Molded
ConductorCopper Conductor
Shipping weight0.45 kg
Package size121 × 64 × 25 mm

Questions about this item

How far can I run this cable between my phone and the amplifier?

The cable is 12 ft long, giving you that distance between the 3.5 mm plug and the two RCA plugs.

Will the shielding keep hum out when the cable sits next to a power strip all day?

A 26 AWG spiral-wrapped copper shield surrounds the conductors to block EMI and RFI interference during continuous use.

What sockets must my source and my amplifier already have for this cable to plug straight in?

Your source needs a 3.5 mm stereo jack and your amplifier needs left and right RCA stereo jacks, both female.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.