We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode fiber cable with LC connectors, 20 metres long

Cables To Go

Cables To Go 37465 network ethernet cable 20 m

SKU CH-QB0R-4G27P MPN 37465

A 20 metre single-mode duplex fibre patch lead with LC connectors in a yellow PVC jacket

  • TypeConsumer Electronics
  • ColorBlack
  • OS2 single-mode fibre for long-distance links
  • LC-LC duplex connectors enable bidirectional transmission
  • 9/125 µm geometry matches standard single-mode specs
  • Yellow PVC jacket aids visual identification in racks
  • 20 metre length suits campus and data-centre runs

20-metre single-mode fibre cable

The Cables To Go 37465 is a 20-metre OS1/OS2 single-mode fibre patch cable with LC duplex connectors on each end. It is built for long-distance network links in enterprise, campus or data-centre environments where copper reach is insufficient. The yellow PVC jacket identifies the single-mode fibre type at a glance.

9/125 micron core and 65.6-foot reach

The 9/125 micron core/cladding geometry supports standard single-mode wavelengths and provides low attenuation over the full 20-metre length. It comfortably handles gigabit and multi-gigabit Ethernet, Fibre Channel and other protocols that specify OS1/OS2 cabling. The fixed 20-metre length means installers must plan exact routing; slack cannot be trimmed without re-termination.

LC duplex connector constraints

Each end uses a push-pull LC duplex connector, so the patch panel or transceiver must present matching LC ports. The duplex housing occupies two adjacent fibres, limiting density compared with newer small-form-factor alternatives. The PVC jacket is not rated for plenum or riser spaces, restricting use to general-purpose indoor pathways.

Highlights

  • OS2 single-mode fibre for long-distance links
  • LC-LC duplex connectors enable bidirectional transmission
  • 9/125 µm geometry matches standard single-mode specs
  • Yellow PVC jacket aids visual identification in racks
  • 20 metre length suits campus and data-centre runs

Specifications

BrandC2G
TypeConsumer Electronics
ColorBlack
Shipping weight0.13 kg
Package size210 × 171 × 19 mm

Questions about this item

Will the 9/125 µm single-mode cores in this 20 m cable work with my existing OS1 patch panels?

Yes, the cable meets OS1 and OS2 specifications so it will connect to standard OS1 patch panels using the same LC duplex connectors.

How can I verify the LC-LC duplex link is performing correctly after installation?

Connect both ends, then check the link lights on your transceivers; a steady green indicator confirms the single-mode path is live.

Does the 37465 package include dust caps or cleaning wipes for the LC ferrules?

The cable ships with protective dust caps on each LC connector; cleaning wipes are not included and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.