We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 shielded Ethernet cable 25 ft with snagless RJ45 connectors

Cables To Go

Cables To Go 3638162 network ethernet cable 25 ft White

SKU CH-MSWJ-874YX MPN 3638162

Shielded Cat6 patch cable with snagless RJ-45 connectors spans 25 ft for noise-resistant gigabit links

  • TypeCategory 6
  • CatCategory 6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length25 ft.
  • ColorWhite
  • Snagless boot protects the latch during frequent patching
  • Shielded twisted-pair construction reduces electromagnetic interference on busy runs
  • 25 ft length reaches across rooms or racks without slack
  • Tested to ANSI/TIA 568 C.2 Cat6 component requirements for reliable throughput
  • White jacket simplifies colour-coding in structured cabling

Cat6 shielded patch cable for interference-prone

This 25 ft Category 6 cable uses shielded twisted-pair construction with snagless RJ-45 connectors on both ends. It is built for voice, data and video distribution where electromagnetic noise would degrade an unshielded run. The white jacket helps identify the link in a colour-coded installation.

Tested to ANSI/TIA 568 C.2 component requirements

Every unit is verified to meet the Cat6 component standard, keeping impedance and structural return loss low. Bonded pair geometry preserves twist spacing to the termination point, which minimises near-end crosstalk during high-bandwidth use.

Snagless boots and per-cable length labels

The moulded boots prevent the latch from catching on adjacent cables during routing or removal. A printed length label on each cable lets installers verify the run length without measuring, speeding up moves, adds and changes in dense patch panels.

Highlights

  • Snagless boot protects the latch during frequent patching
  • Shielded twisted-pair construction reduces electromagnetic interference on busy runs
  • 25 ft length reaches across rooms or racks without slack
  • Tested to ANSI/TIA 568 C.2 Cat6 component requirements for reliable throughput
  • White jacket simplifies colour-coding in structured cabling

Specifications

BrandCables To Go
Model3638162
TypeCategory 6
CatCategory 6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length25 ft.
ColorWhite
Shipping weight0.33 kg
Package size229 × 152 × 25 mm

Questions about this item

How do I install the 25 ft Cat6 shielded cable without damaging the RJ-45 connectors?

Press each RJ-45 plug straight into the port until the snagless tab clicks; forcing it at an angle bends the internal pins and breaks the shield bond.

What maintenance will the Cat6 shielded patch cable need over time?

Inspect the RJ-45 boots for cracks and the white jacket for kinks; replace the cable if the shield continuity fails or the pair bonding separates near the ends.

What limit appears first when the 25 ft Cat6 cable runs at full bandwidth continuously?

The ANSI/TIA 568 C.2 component spec caps the run at 25 ft for full Cat6 performance; beyond that, return loss and crosstalk rise above the tested limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.