We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fibre patch cable with two LC male and two SC male connectors, 16.4 ft long

Cables To Go

Cables To Go 33157 OM1 fibre optic cable LC-SC 62.5/125 duplex multimode PVC orange 16.4 ft

SKU CH-S0TS-D33MR MPN 33157

OM1 duplex multimode patch cable with LC-to-SC connectors, 16.4 ft orange PVC jacket for gigabit Ethernet and fibre channel links

  • TypeCable Connectors
  • ColorOrange
  • Length0.5 ft.
  • Connector Number1
  • Connector DetailConnector A: 2 x LC Male Connector B: 2 x SC Male
  • SpecificationsOptical Multimode 1 (OM1) fiber supporting 200/500 MHz.km OF
  • OM1 multimode supports 200/500 MHz.km for fast Ethernet and gigabit links
  • Duplex LC to SC connectors fit high-density panels and legacy equipment
  • OFNR-rated PVC jacket meets riser safety requirements for in-wall runs
  • 4 ft length with 1.8 mm jacket suits rack-to-rack patching
  • Typical 0.30 dB insertion loss preserves signal budget over short runs

Product Identity

This Cables To Go 33157 is a duplex multimode fibre optic patch cable built for fast Ethernet, fibre channel, ATM and gigabit Ethernet links. It targets network installers and system integrators who need reliable OM1 connectivity between LC and SC equipment ports. The orange PVC jacket carries an OFNR riser rating for indoor vertical runs.

Critical Specification

The cable uses OM1 62.5/125 µm fibre specified at 200/500 MHz.km OFL bandwidth for 850/1300 nm wavelengths. Maximum connector loss is 0.50 dB with a typical loss of 0.30 dB and typical return loss of -25 dB. Attenuation at 1300 nm is 1.0 dB/km, setting the reach limit for gigabit-class links.

Thermals Noise Power

As a passive optical assembly the cable generates no heat, emits no noise and draws no electrical power during operation. The PVC jacket and 900 µm buffer tolerate normal indoor temperatures. Mechanical limits include a 5.0 cm loaded bend radius, 3.0 cm unloaded bend radius, 750 N/cm crush resistance and 5,000 flex cycles for durable installation.

Highlights

  • OM1 multimode supports 200/500 MHz.km for fast Ethernet and gigabit links
  • Duplex LC to SC connectors fit high-density panels and legacy equipment
  • OFNR-rated PVC jacket meets riser safety requirements for in-wall runs
  • 4 ft length with 1.8 mm jacket suits rack-to-rack patching
  • Typical 0.30 dB insertion loss preserves signal budget over short runs

Specifications

BrandCables To Go
Model33157
TypeCable Connectors
ColorOrange
Length0.5 ft.
Connector Number1
Connector DetailConnector A: 2 x LC Male
Connector B: 2 x SC Male
SpecificationsOptical Multimode 1 (OM1) fiber supporting 200/500 MHz.km OFL at 850/1300 nm.
LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip)
SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
Maximum Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Typical Return Loss: -25 dB
Buffer Material: PVC
Buffer OD: 900 um
Jacket Material: PVC (OFNR riser-rated)
Jacket OD: 1.8 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Maximum Tensile Load: 100 N/cm
Installation (Loade
FeaturesWith LC to SC termination, this high-quality fiber optic patch cable is specifically designed for fast ethernet, fibre channel, ATM and gigabit ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. The LC connector with its RJ-style latch clip design is easy to engage and disengage, and gives each connection greater durability in resisting pulls, strains, snags, and impacts during cabling installs and maintenance. The SC connector f
Shipping weight0.05 kg
Package size165 × 152 × 25 mm

Questions about this item

What bandwidth can the 200/500 MHz·km OM1 rating actually deliver in a real link?

The OM1 multimode fiber supports 200 MHz·km at 850 nm and 500 MHz·km at 1300 nm, suitable for Fast Ethernet, Gigabit Ethernet, Fibre Channel and ATM over typical campus distances.

How does the LC-to-SC duplex interface limit the maximum connector loss?

Maximum connector loss is 0.50 dB per mated pair with a typical loss of 0.30 dB and typical return loss of -25 dB.

Will the 10.75 mm high LC and 10.6 mm high SC connectors fit in a standard patch panel?

LC connectors measure 10.75 mm H × 12.5 mm W × 50 mm D with duplex clip; SC connectors measure 10.6 mm H × 26 mm W × 58 mm D with duplex clip, both fitting standard duplex cut-outs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.