We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Cat6 ethernet cable with RJ-45 connectors, 5 ft long

Cables To Go

Cables To Go 31346 Cat6 network ethernet cable 5 ft Yellow

SKU CH-KY2S-59TVV MPN 31346

A 5 ft Cat6 patch cable with RJ-45 connectors rated for 550 MHz bandwidth and snagless boots

  • Typeothers
  • Cat6
  • Connector ARJ-45 Male
  • Connector BRJ-45 Male
  • Length5 ft.
  • ColorYellow
  • Handles bandwidth-intensive applications up to 550MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Bonded pairs maintain twist-spacing to the termination point
  • Shortened body plug minimises Near-End Crosstalk levels
  • Snagless boot prevents cable snags during installation

Ready-to-use Cat6 patch cable

This five-foot Cat6 patch cable arrives with RJ-45 male connectors on both ends and a snagless boot that protects the latch during routing. The yellow jacket makes it easy to identify in a crowded rack or behind a desk. It is suited for home-office, small-business or temporary-installation scenarios where a short, pre-terminated link is preferred over bulk cable and field termination.

Bandwidth ceiling and standard limits

The cable is rated for bandwidth-intensive applications up to 550 MHz and meets Cat6 TIA/EIA-568-B-2.1 draft 9 specifications. That rating supports gigabit ethernet and 10-gigabit ethernet only up to the shorter distance limits defined by the Cat6 standard; it does not reach the 100-metre channel length that higher-category or shielded cables can guarantee for 10 GbE. Pair bonding and a shortened plug body reduce near-end crosstalk, while the unshielded construction keeps the cable flexible for patch-panel work.

Verify connector spacing and run length

Confirm that the 5 ft length reaches between your switch, router or wall jack and the target device without tension or sharp bends. Check that the RJ-45 ports on your equipment accept standard modular plugs; the snagless boot adds a small amount of depth that can interfere with tightly stacked ports. Because the cable is unshielded, avoid running it parallel to power cables or fluorescent ballasts where electromagnetic interference could degrade performance.

Highlights

  • Handles bandwidth-intensive applications up to 550MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Bonded pairs maintain twist-spacing to the termination point
  • Shortened body plug minimises Near-End Crosstalk levels
  • Snagless boot prevents cable snags during installation

Specifications

BrandC2G
Model31346
Typeothers
Cat6
Connector ARJ-45 Male
Connector BRJ-45 Male
Length5 ft.
ColorYellow
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during i
Shipping weight0.07 kg
Package size152 × 127 × 19 mm

Questions about this item

Should I choose the 5 ft yellow Cat6 cable or a different length for my patch panel?

The 5 ft length suits short rack-to-switch runs; pick a longer version only if the distance between devices exceeds 5 ft.

What does the 550 MHz rating mean when the cable is installed in my network?

It certifies headroom for bandwidth-intensive voice, data and video traffic well above the 100 MHz baseline of standard Cat6 wire.

Does the RJ-45 Cat6 TIA/EIA-568-B-2.1 interface cap my speed at 1 Gbps?

The standard supports up to 10 Gbps over short distances; the 550 MHz bandwidth and snagless connectors maintain signal quality for that throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.