We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-A dongle with RJ45 port for Cat5 extension

Cables To Go

Cables To Go 29348 USB 1.1 Cat5 Extender Dongle Transmitter

SKU CH-T2D4-22NFD MPN 29348

Extends USB 1.1 signals up to 150 feet over Cat5, Cat5e or Cat6 cable using a bus-powered transmitter dongle with toolless RJ45 connector

  • Changer TypeUSB to Ethernet
  • ColorMulticolor
  • SpecificationsInput: One USB Type A Male Output: One RJ45 Female This solu
  • FeaturesThe complete solution is connected via a standard Cat5, Cat5
  • Weight0.22
  • Extends USB devices up to 150 feet over Cat5 cabling
  • Bus-powered design needs no external power supply
  • Toolless IDC RJ45 connector simplifies cable termination
  • Works with Cat5, Cat5E or Cat6 UTP cable
  • USB 1.1 compliant for reliable device communication

USB 1.1 Cat5 extender transmitter

The Cables To Go 29348 is a USB 1.1 superbooster dongle transmitter that sends USB signals over standard Cat5, Cat5e or Cat6 UTP cable up to 150 feet. It connects a USB Type A male plug to an RJ45 female jack and requires a separate receiver to complete the link. Bus-powered operation means no external power supply is needed. Suited for installers who need to reach a projector or interactive whiteboard beyond the normal cable limit.

Sustained signal behaviour

Because the extender uses a wired Cat5-class cable, the link remains stable for the full 150-foot distance without the signal drop-off seen in very long passive USB cables. The USB 1.1 bandwidth is maintained continuously, so devices such as interactive whiteboards or projectors keep responding during extended sessions. No external power adapter is involved, so there is no risk of a power brick overheating or shutting down under load.

Thermals, noise and power

The dongle draws all its power from the host USB port, consuming only the bus-current allowance defined by the USB 1.1 specification. With no fan or active cooling, it runs silently and adds negligible heat to the installation. The lightweight 0.22 unit stays cool to the touch during normal operation, making it suitable for ceiling-mounted or concealed positions where airflow is limited.

Highlights

  • Extends USB devices up to 150 feet over Cat5 cabling
  • Bus-powered design needs no external power supply
  • Toolless IDC RJ45 connector simplifies cable termination
  • Works with Cat5, Cat5E or Cat6 UTP cable
  • USB 1.1 compliant for reliable device communication

Specifications

BrandC2G
Model29348
Changer TypeUSB to Ethernet
ColorMulticolor
SpecificationsInput: One USB Type A Male
Output: One RJ45 Female
This solution extends the signal of a USB device to a host computer up to 150 feet
Enabling you to place your USB projector
Interactive whiteboard
USB superbooster dongle is powerful yet simple
with no drivers to install or special software required
It's also compatible with any computer that supports USB
FeaturesThe complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy installation
Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable
Because the USB superbooster dongle is bus-powered, no external power source is required
Compliant with USB specification 1.1
Weight0.22
Shipping weight0.11 kg
Package size146 × 121 × 51 mm

Questions about this item

Does the 29348 transmitter generate noticeable heat or fan noise when running continuously?

The dongle is bus-powered and has no fan, so it produces no audible noise and negligible heat during all-day operation.

What cable and companion unit do I need to make this transmitter work?

You must supply a Cat5, Cat5e or Cat6 UTP cable and purchase the matching receiver unit separately to complete the link.

Will this USB 1.1 extender work properly with a legacy USB 1.0 scanner I still use?

Yes, the extender complies with the USB 1.1 specification and is backward-compatible with USB 1.0 devices such as older scanners.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.