We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifty blue Cat6 Ethernet cables with snagless RJ45 connectors, 10 ft each

Cables To Go

Cables To Go 29013 Cat6 network ethernet cable 50 pack 10 ft blue

SKU CH-S6NJ-NMKCJ MPN 29013

Pack of fifty 10 ft Cat6 patch cables with snagless RJ45 connectors for Gigabit networks

  • TypeConsumer Electronics
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorBlue
  • 50 cables in one pack simplify large installs
  • Cat6 rated for 550 MHz bandwidth-intensive applications
  • Snagless boots prevent cable snags during installation
  • Bonded twisted pairs reduce Near-End Crosstalk
  • 24 AWG stranded copper with gold-plated RJ45 connectors

50-pack Cat6 patch cables for structured wiring

This 50-pack of Cat6 patch cables supplies 10 ft blue UTP leads with RJ45 connectors for voice, data and video distribution. Each cable uses 24 AWG stranded copper conductors and 50 micron gold-plated contacts. The moulded snagless boots prevent latch damage during dense patch-panel work.

Replaces Cat5e links when 550 MHz headroom is needed

The jump from 100 MHz Cat5e is worth it when runs must carry Gigabit Ethernet or bandwidth-intensive video without excess Near-End Crosstalk. Bonded pair construction maintains twist spacing to the termination point, reducing structural return loss compared with standard 100 MHz wire.

Limited to 100 m total channel length by the Cat6

At 10 ft each, these patch cords consume only a small portion of the 100 m maximum channel allowance, leaving ample budget for horizontal cable. Unshielded PVC jackets offer no protection against external EMI, so keep runs clear of power cables and fluorescent ballasts.

Highlights

  • 50 cables in one pack simplify large installs
  • Cat6 rated for 550 MHz bandwidth-intensive applications
  • Snagless boots prevent cable snags during installation
  • Bonded twisted pairs reduce Near-End Crosstalk
  • 24 AWG stranded copper with gold-plated RJ45 connectors

Specifications

BrandC2G
Model29013
TypeConsumer Electronics
Cat6
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorBlue
ShieldedNo
Features50pk
Conductor: 4-pair (UTP) 24 AWG stranded copper
Connector: 50 micron gold-plated RJ45
Jacket: PVC
Standard: Category 6 TIA/EIA-568-B-2.1, draft 9
Jacket Rating: Standard
The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.
Shipping weight6.54 kg
Package size413 × 413 × 114 mm

Questions about this item

What clearance does the snagless boot need behind a patch panel or wall jack?

The shortened body plug and molded snagless boot are designed for tight spaces; allow roughly the boot depth plus cable bend radius behind the panel.

What is the common mistake when routing these 10 ft UTP cables in a bundle?

Over-tightening cable ties crushes the 24 AWG stranded pairs and degrades the 550 MHz bandwidth; use hook-and-loop straps with a loose loop.

When should a cable from this 50 pack be replaced?

Replace any cable if the snagless boot cracks, the RJ45 latch fails, or the jacket shows kinks that permanently distort the bonded pair twists.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.