We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White keystone insert with USB-A and USB-B female ports

Cables To Go

Cables To Go 28751 USB A/B Female Keystone Insert

SKU CH-WPEJ-29AQQ MPN 28751

A snap-in keystone insert with one USB Type A female and one USB Type B female port for wall plates and patch panels

  • Changer TypeUSB
  • SpecificationsConnector on First End:1 x Type A Female USB Connector on Se
  • Weight0.03
  • TAA compliant for government procurement
  • RoHS compliant materials reduce hazardous substances
  • Snap-in keystone design fits standard wall plates
  • Dual USB-A and USB-B female ports connect both cable types
  • Lightweight at .03 lbs for easy installation

Snap-In USB Keystone Insert

The Cables To Go 28751 is a white keystone module that accepts one USB Type A male connector on the first end and one USB Type B male connector on the second end. It snaps into compatible wall plates, patch panels and surface boxes to provide a fixed coupling point for USB cabling. The insert is RoHS and TAA compliant for regulated environments. It suits installers who need a clean, panel-mounted USB pass-through.

Connector Pair Determines Compatibility

The module presents a single USB Type A female port and a single USB Type B female port in a fixed orientation. This specific pairing means it only links a Type A male plug to a Type B male plug; it cannot connect two Type A cables or two Type B cables. Verify that your cable ends match this A-to-B arrangement before purchasing.

Passive Coupler With No Power Draw

As a passive mechanical coupler the insert adds no active electronics, so it draws no power and generates no heat or noise in normal use. Signal integrity depends entirely on the quality and length of the cables attached to either side. The lightweight construction at 0.03 weight units adds negligible load to the mounting surface.

Highlights

  • TAA compliant for government procurement
  • RoHS compliant materials reduce hazardous substances
  • Snap-in keystone design fits standard wall plates
  • Dual USB-A and USB-B female ports connect both cable types
  • Lightweight at .03 lbs for easy installation

Specifications

BrandC2G
Model28751
Changer TypeUSB
SpecificationsConnector on First End:1 x Type A Female USB
Connector on Second End:1 x Type B Female USB
Weight0.03
Shipping weight0.01 kg
Package size38 × 19 × 19 mm

Questions about this item

What does the USB A/B female keystone insert do once snapped into a wall plate or patch panel?

It provides a fixed USB Type-A female port and a USB Type-B female port so you can plug in a standard USB-A male cable on one side and a USB-B male cable on the other without soldering or loose adapters.

Which connector standard does the insert use and what speed does that limit the link to?

The module uses USB Type-A and Type-B connectors; the practical throughput is capped by whatever USB generation the attached cables and host controller support, since the insert itself is a passive coupler.

What physical space does the insert need to fit and mount?

It snaps into any standard keystone cut-out on compatible wall plates, patch panels or surface-mount boxes; the white module weighs 0.03 lb and requires no tools beyond finger pressure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.