We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode fibre patch cable with LC and SC connectors, 10 metres long

Cables To Go

Cables To Go 28523 fibre optic cable LC-SC 9/125 duplex single-mode 10 m

SKU CH-BDNS-7PFXH MPN 28523

A 10 m yellow duplex single-mode patch cable with LC and SC connectors for high-bandwidth links over long distances

  • TypeCable Connectors
  • ColorYellow
  • Length0.5 ft.
  • Connector Number4
  • Connector DetailConnector A: LC Male Connector B: SC Male
  • SpecificationsLC Connector Dimensions: 10.75mm - Height x 12.5mm - Width x
  • High bandwidth over long distances with 9/125 single-mode fiber
  • LC to SC duplex connectors link compatible equipment directly
  • 10 metre length suits rack-to-rack or cross-room runs
  • Yellow PVC jacket identifies single-mode cable at a glance
  • Cost-effective OS2 performance for gigabit ethernet networks

Cable purpose and fit

This 10 metre single-mode fibre patch cord connects LC and SC equipment in campus, data-centre or carrier networks. It suits installers who need OS2 performance over longer runs at a practical cost.

Build and daily handling

Yellow PVC jacket identifies the single-mode type at a glance. Duplex LC and SC plugs each carry a clip; LC ends measure 10.75 by 12.5 by 50 millimetres, SC ends 10.6 by 26 by 58 millimetres with clips fitted.

Compatibility checks

Verify both ends of your link use LC and SC single-mode ports and that the 9/125 micron core matches your existing cabling. Confirm the 10 metre reach covers the route without excess slack.

Highlights

  • High bandwidth over long distances with 9/125 single-mode fiber
  • LC to SC duplex connectors link compatible equipment directly
  • 10 metre length suits rack-to-rack or cross-room runs
  • Yellow PVC jacket identifies single-mode cable at a glance
  • Cost-effective OS2 performance for gigabit ethernet networks

Specifications

BrandC2G
Model28523
TypeCable Connectors
ColorYellow
Length0.5 ft.
Connector Number4
Connector DetailConnector A: LC Male
Connector B: SC Male
SpecificationsLC Connector Dimensions: 10.75mm
- Height x 12.5mm
- Width x 50mm
- Depth (with installed duplex clip)
SC Connector Dimensions: 10.6mm
- Height x 26mm
- Width x 58mm
- Depth (with installed duplex clip)
Maximum Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Typical Return Loss: -55 dB
Buffer Material: PVC
Buffer OD: 900 um
Jacket Material: PVC (OFNR riser-rated)
Jacket OD: 1.8 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Maximum Tensile Load: 100 N/cm
Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
Long-Term (Unloaded) Minimu
FeaturesCost-effective solution that provides high bandwidth and transmission rates over longer distances.
With LC to SC termination, this high-quality fiber optic patch cable is specifically designed for gigabit ethernet applications.
The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it.
A pull-proof jacket design surrounds the popular 9/125 single mode fiber, immune to electrical interference.
Shipping weight0.05 kg
Package size127 × 127 × 6 mm

Questions about this item

What interface standard does the 9/125 single-mode fibre use, and what distance does it cap in practice?

The cable uses 9/125 single-mode fibre with LC and SC connectors, designed for gigabit ethernet applications and longer-distance transmission.

What physical space do the LC and SC duplex connectors need to fit side by side?

The LC duplex clip measures 12.5 mm wide by 50 mm deep, while the SC duplex clip measures 26 mm wide by 58 mm deep; allow clearance for both profiles.

How is the duplex clip installed on the LC and SC ends, and what step is often missed?

Snap the supplied duplex clip onto each connector pair until it clicks; the step often missed is verifying both clips are fully seated before routing the 10 m cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.