We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue shielded Cat5E ethernet cable, 7 ft, RJ45 ends

Cables To Go

Cables To Go 27251 7 ft Shielded Cat5E network ethernet cable

SKU CH-2D2E-1146A MPN 27251

A 7 ft shielded Cat5E patch cable with RJ45 connectors that protects network signals from EMI and RFI interference

  • Typeothers
  • Cat5E
  • Connector ARJ45
  • Connector BRJ45
  • Length7 ft.
  • ColorBlue
  • Shielded construction blocks EMI/RFI interference in noisy environments
  • Cat5e rating supports fast Ethernet and Gigabit network speeds
  • 7 ft length fits typical desk-to-switch connections
  • 24 AWG stranded conductors provide flexibility for tight routing
  • Molded boots add strain relief for durable long-term use

Shielded Cat5E 7 ft cable

This 7 ft shielded Cat5E patch cable uses 4-pair 24 AWG stranded conductors with RJ45 connectors on both ends. The STP construction protects data signals from EMI and RFI interference in noisy environments. It is suited for connecting network adapters, switches, routers, modems and patch panels in home or office installations. The blue jacket allows quick visual identification among other cables.

Molded boot installation

The molded boot design adds strain relief and makes the connector easier to grip when inserting or removing the plug. No tools are required; simply push the RJ45 connector into the port until it clicks. The main risk is forcing the latch tab past the port opening, which can snap the tab and leave the cable unsecured. Route the cable so the boot is not bent sharply at the jack, as repeated stress can fatigue the internal conductors.

Pre-order checklist

Verify that the 7 ft length reaches between your two devices without excessive slack or tension. Confirm both endpoints accept standard RJ45 connectors and that your switch, router or patch panel supports shielded cabling grounding if you require full EMI protection. Ensure the pathway avoids tight bends tighter than the cable's natural curve radius. Check that the blue colour matches your existing cable-management scheme if colour coding is in use.

Highlights

  • Shielded construction blocks EMI/RFI interference in noisy environments
  • Cat5e rating supports fast Ethernet and Gigabit network speeds
  • 7 ft length fits typical desk-to-switch connections
  • 24 AWG stranded conductors provide flexibility for tight routing
  • Molded boots add strain relief for durable long-term use

Specifications

BrandC2G
Model27251
Typeothers
Cat5E
Connector ARJ45
Connector BRJ45
Length7 ft.
ColorBlue
ShieldedYes
FeaturesProtect from EMI/RFI interference; connect network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking applications in high noise environments.
Conductor: 4-pair 24 AWG stranded STP
Connector: Shielded 50 micron gold-plated RJ45
Jacket: PVC
Wired: TSB 568B (AT&T 258A)
Foil shielding with drain wire
Certification: TIA/EIA
Weight: 0.210lbs.
Protect your high speed network from noise and electromagnetic interference when you connect with our shielded Cat5E patch cable.
Meets or exceeds industry standards for NEXT and return loss.
The molded boot provid
Shipping weight0.10 kg
Package size132 × 122 × 38 mm

Questions about this item

How can I confirm the 27251 cable is passing data correctly after I plug it in?

Check the link lights on both connected devices; a solid or blinking LED on the switch, router or network card shows the Cat 5e link is active and negotiating at the expected speed.

What comes with the 27251 and what must I supply myself?

The package contains the 7 ft shielded Cat 5e patch cable with molded RJ45 plugs on both ends; you provide the network adapters, switches, routers, modems or patch panels you intend to connect.

Which length and shielding option should I pick for a noisy environment?

Choose this 7 ft shielded version when the run stays within seven feet and the installation passes near power cables, fluorescent lights or other EMI/RFI sources that could degrade an unshielded cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.