We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Cat6 ethernet cable with snagless RJ45 connectors, 7 ft

Cables To Go

Cables To Go 27192 Cat6 network ethernet cable snagless unshielded yellow 7 ft 2.13 m

SKU CH-A94R-X4G5R MPN 27192

Cat6 snagless unshielded patch cable for voice, data and video up to 550 MHz, 7 ft yellow

  • TypeNetwork Cable
  • Cat6
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length7 ft.
  • ColorYellow
  • Cat6 performance handles bandwidth-intensive apps up to 550 MHz
  • Snagless boot prevents cable catches and adds strain relief
  • Bonded-pair construction maintains twist spacing to minimise crosstalk
  • 7 ft yellow jacket enables easy colour-coded network runs
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards for reliable data flow

What this cable is and who needs it

The Cables To Go 27192 is a Cat6 unshielded twisted-pair patch cable with RJ45 male connectors on both ends. It is built for voice, data and video distribution in gigabit Ethernet networks. The 7 ft yellow jacket allows easy colour coding in patch panels or desktop runs. It meets TIA/EIA-568-B-2.1 draft 9 standards and supports bandwidth up to 550 MHz.

What to check before ordering

Verify that your switch, router or wall jack uses standard RJ45 ports and that a 7 ft run reaches between the two devices without tension. Confirm the installation path can accommodate an unshielded cable; environments with strong EMI may require shielded alternatives. The snagless boot adds strain relief but still needs a clear port opening. No tooling is required beyond a simple push-click connection.

Behaviour under sustained load

Bonded-pair construction maintains twist spacing to the termination point, keeping Near-End Crosstalk low during continuous high-throughput traffic. Impedance and structural return loss are reduced per the Cat6 specification, so signal integrity holds steady over long transfers rather than only in short bursts. The moulded boot protects the latch from repeated insertion cycles in busy rack or desk environments.

Highlights

  • Cat6 performance handles bandwidth-intensive apps up to 550 MHz
  • Snagless boot prevents cable catches and adds strain relief
  • Bonded-pair construction maintains twist spacing to minimise crosstalk
  • 7 ft yellow jacket enables easy colour-coded network runs
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards for reliable data flow

Specifications

BrandC2G
Model27192
TypeNetwork Cable
Cat6
Connector ARJ45 Male
Connector BRJ45 Male
Length7 ft.
ColorYellow
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during i
Shipping weight0.10 kg
Package size131 × 130 × 36 mm

Questions about this item

What comes in the box and do I need anything else to connect two RJ45 ports?

The box contains the 7 ft Cat6 patch cable with RJ45 male plugs on both ends. No extra adapters or couplers are required to link two standard RJ45 ports.

Should I choose this 7 ft yellow Cat6 cable or a different length for my rack patching?

Pick the 7 ft (2.13 m) length when the switch and device are within that distance; longer runs need a longer cable, shorter runs a shorter one.

What does the 550 MHz bandwidth rating mean for my Gigabit Ethernet link?

The 550 MHz rating shows the cable meets Cat6 TIA/EIA-568-B-2.1 draft 9 specs, supporting Gigabit Ethernet with reduced impedance and structural return loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.