We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat6 Ethernet cable, 50 ft, snagless RJ45 connectors

Cables To Go

Cables To Go 27186 Cat6 network ethernet cable snagless unshielded red 50 ft 15.24 m

SKU CH-3W4P-NS73M MPN 27186

A 50-foot red Cat6 patch cable rated for 550 MHz bandwidth with snagless RJ45 connectors for voice, data and video distribution

  • TypeNetwork Cable
  • Cat6
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length50 ft.
  • ColorRed
  • Supports bandwidth-intensive tasks up to 550 MHz
  • Snagless boot prevents cable catches during installation
  • 50 ft length suits long-distance network runs
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Red colour simplifies cable identification in racks

Red Cat6 patch cable for 550 MHz bandwidth

This 50 ft snagless unshielded cable carries voice, data and video up to 550 MHz. It meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards and is UL verified. Bonded pairs preserve twist spacing to the connector, reducing impedance and structural return loss. The shortened body plug keeps near-end crosstalk low.

Snagless boot eases routing in tight spaces

The moulded snag-free boot prevents the latch from catching on other cables during installation and adds strain relief at the plug. Because the cable is unshielded, it stays flexible for long runs through trunking or under floors. No grounding or drain wire is required, so it fits standard RJ45 ports on switches, routers and wall plates without extra hardware.

Replaces Cat5e links limited to 100 MHz

Upgrading from older 100 MHz rated patch cords removes a bottleneck on gigabit and multi-gigabit segments. The jump is worthwhile when the link must carry sustained high-throughput traffic such as large file transfers or streaming video. Installations that already meet Cat6 performance or require shielded cabling for noisy environments will not gain from this model.

Highlights

  • Supports bandwidth-intensive tasks up to 550 MHz
  • Snagless boot prevents cable catches during installation
  • 50 ft length suits long-distance network runs
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Red colour simplifies cable identification in racks

Specifications

BrandC2G
Model27186
TypeNetwork Cable
Cat6
Connector ARJ45 Male
Connector BRJ45 Male
Length50 ft.
ColorRed
ShieldedNo
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during
Shipping weight0.61 kg
Package size197 × 178 × 38 mm

Questions about this item

What bandwidth limit appears first when the cable runs at 550 MHz for long periods?

The cable is rated for 550 MHz bandwidth-intensive applications and meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards, with bonded pairs that maintain twist-spacing to reduce impedance and structural return loss under sustained use.

How much heat or noise does the 50 ft unshielded cable generate during all-day operation?

As a passive copper patch cable with RJ45 male connectors on both ends, it produces no heat or noise of its own; thermal and acoustic output depends entirely on the connected networking equipment.

Which devices must already have RJ45 ports for this Cat6 50 ft red cable to work?

Any two devices with standard RJ45 Ethernet ports — such as routers, switches, computers, IP cameras, or NAS units — can be connected directly using the male RJ45 connectors on each end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.