We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat6 patch cable, 1 ft, snagless RJ45 ends

Cables To Go

Cables To Go 27180 Cat6 network ethernet cable red 1 ft

SKU CH-ADS5-W3WGM MPN 27180

A 1 ft Cat6 patch cable with snagless RJ45 connectors for Gigabit Ethernet up to 550 MHz

  • Typeothers
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorRed
  • Snagless boot prevents cable catches during installs
  • Cat6 550 MHz rating supports Gigabit bandwidth needs
  • Bonded pair construction reduces impedance and return loss
  • Red jacket enables quick colour-coded network identification
  • UL verified to TIA/EIA-568-B-2.1 draft 9 standard

One-foot Cat6 patch cable for short runs

This Cables To Go 27180 cable carries data, voice and video over a one-foot link using copper conductors and RJ45 male connectors on both ends. The red PVC jacket allows quick colour-coding in dense patch panels or desk-side connections. It meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards and is UL verified for structured-wiring compliance.

Rated bandwidth of 550 MHz under continuous load

The bonded-pair construction maintains twist spacing to the termination point, keeping near-end crosstalk and structural return loss low when the link runs at full 550 MHz capacity. Performance is specified for sustained bandwidth-intensive applications rather than short bursts, and the cable exceeds basic 100 MHz wire baselines for impedance stability.

Snagless boot eases routing in tight spaces

The moulded snag-free boot prevents the connector tabs from catching on adjacent cables during installation and provides strain relief at the plug body. The shortened plug body fits high-density ports without blocking neighbouring jacks. Installers who need longer reach or shielded variants for noisy environments will need a different cable.

Highlights

  • Snagless boot prevents cable catches during installs
  • Cat6 550 MHz rating supports Gigabit bandwidth needs
  • Bonded pair construction reduces impedance and return loss
  • Red jacket enables quick colour-coded network identification
  • UL verified to TIA/EIA-568-B-2.1 draft 9 standard

Specifications

BrandC2G
Model27180
Typeothers
Cat6
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorRed
FeaturesCable Characteristic: Patch Cable
Connector on First End: 1 x RJ-45 Male
Connector on Second End: 1 x RJ-45 Male
Conductor: Copper
Jacket: PVC
Shipping weight0.02 kg
Package size127 × 64 × 6 mm

Questions about this item

Does the 550 MHz Cat6 cable generate any heat or noise when running continuously?

No, the 1 ft Cat6 patch cable is a passive copper assembly with RJ45 connectors and PVC jacket; it draws no power and produces no heat or audible noise during operation.

What devices must I already have to use this 1 ft red Cat6 cable?

You need two pieces of equipment with standard RJ45 Ethernet ports — such as a router, switch, PC, NAS, or IP camera — to plug each end of the cable into.

Will this Cat6 patch cable work alongside older Cat5e or Cat5 cables already in my network?

Yes, the cable meets TIA/EIA-568-B-2.1 Cat6 standards and is fully backward compatible with Cat5e and Cat5 infrastructure; it will negotiate the highest speed both ends support.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.