We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 UTP patch cable with snagless RJ45 connectors, 50 ft length

Cables To Go

Cables To Go 27166 Cat6 snagless UTP patch cable white 50 ft 15.24 m

SKU CH-98JB-XRHHX MPN 27166

50 ft white Cat6 snagless UTP patch cable rated for 550 MHz bandwidth-intensive voice, data and video distribution

  • TypeNetwork Cable
  • Cat6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length50 ft.
  • ColorWhite
  • Supports bandwidth-intensive apps up to 550 MHz
  • Snagless boot prevents cable snags during installation
  • Bonded pairs maintain twist spacing to reduce return loss
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • 50 ft length suits extended network runs

Network patch cable for gigabit runs

This 50 ft Cat6 UTP patch cable uses RJ-45 connectors at both ends and is built to handle bandwidth-intensive voice, data and video distribution up to 550 MHz. The white jacket and snagless boot make it easy to identify and pull through tight pathways without catching.

Limited to 550 MHz bandwidth ceiling

The Cat6 standard this cable meets tops out at 550 MHz, so it cannot carry the higher frequencies required for 10 GbE over the full 100 m channel. Performance beyond 550 MHz or over longer single runs is not supported by the TIA/EIA-568-B-2.1 draft 9 rating.

Verify connector spacing and pathway length

Check that your patch-panel or switch ports accept the shortened-body RJ-45 plugs without blocking adjacent ports. Confirm the 50 ft / 15.24 m length reaches between your termination points with enough slack for strain relief and future re-termination.

Highlights

  • Supports bandwidth-intensive apps up to 550 MHz
  • Snagless boot prevents cable snags during installation
  • Bonded pairs maintain twist spacing to reduce return loss
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • 50 ft length suits extended network runs

Specifications

BrandC2G
Model27166
TypeNetwork Cable
Cat6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length50 ft.
ColorWhite
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during i
Shipping weight0.61 kg
Package size174 × 168 × 77 mm

Questions about this item

Should I choose the 50 ft white Cat6 cable or a different length for my run?

The 50 ft (15.24 m) white Cat6 snagless patch cable suits runs up to that length; pick a shorter cable if your distance is less to avoid excess slack.

What does the 550 MHz rating mean for my actual network speed?

The 550 MHz bandwidth supports Gigabit Ethernet and handles voice, data and video distribution with reduced crosstalk and return loss.

Does the RJ-45 Cat6 TIA/EIA-568-B-2.1 interface limit my connection to 100 MHz?

No — the cable meets Cat6 draft 9 standards and is verified to 550 MHz, far above the 100 MHz baseline of older categories.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.