Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
A 25 ft Cat6 patch cable rated to 550 MHz with snagless RJ45 connectors for voice, data and video distribution
This 25-foot Cat6 patch cable delivers bandwidth up to 550 MHz for data, voice and video distribution. White snagless RJ45 connectors on both ends simplify routing through tight spaces. The design meets TIA/EIA-568-B-2.1 draft 9 standards and is UL verified for reliable performance in home or office networks. Bonded pair construction helps maintain twist spacing to the termination point.
The moulded snag-free boot prevents the cable from catching during installation and provides strain relief at each connector. Bonded pairs keep twist spacing consistent along the full length, drastically reducing impedance mismatch and structural return loss compared with standard 100 MHz wire. High-quality conductors and a shortened plug body minimise near-end crosstalk for stable throughput.
Use this cable to replace Cat5e or damaged patch cords when you need headroom for gigabit and multi-gigabit links up to 550 MHz. The 25 ft length suits typical desk-to-switch or patch-panel runs without excess slack. It is not suited for outdoor burial, PoE loads beyond the Cat6 specification, or installations requiring shielded cable.
| Brand | C2G |
|---|---|
| Model | 27165 |
| Type | Network Cable |
| Cat | 6 |
| Connector A | RJ45 Male |
| Connector B | RJ45 Male |
| Length | 25 ft. |
| Color | White |
| Features | For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during i |
| Shipping weight | 0.31 kg |
| Package size | 159 × 159 × 32 mm |
Push each RJ45 plug straight into the port until it clicks; the moulded boot prevents the latch from catching on adjacent cables. Avoid bending the cable tighter than a 25 mm radius at the connector.
Inspect the white jacket and RJ45 contacts periodically; replace the cable if the boot cracks, the latch breaks, or performance drops below the 550 MHz rating.
At 25 ft the cable stays well within the 100 m channel limit, so the first bottleneck is usually the connected switch or NIC port speed rather than the cable itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?