Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086978BTC
In stock
Cables To Go
Cables To Go 27162 Cat6 Snagless Unshielded Network Ethernet Cable White 7 ft 2.13 m
Category 6 UTP patch cable with snagless RJ45 connectors, 7 ft length, gold-plated contacts, 550 MHz rated
- Typeothers
- Cat6
- Connector ARJ45 Male
- Connector BRJ45 Male
- Length7 ft.
- ColorWhite
- Snagless boot prevents cable catches during installation
- Cat6 rated for 550 MHz bandwidth performance
- 24 AWG stranded copper conductors ensure flexibility
- 50 micron gold-plated RJ45 connectors resist corrosion
- Meets TIA/EIA-568-B-2.1 Category 6 standard
What This Cable Is
The C2G 27162 is a Category 6 unshielded patch cable with RJ45 male connectors on both ends. It uses 24 AWG stranded copper conductors arranged in four twisted pairs and a PVC jacket. The plugs feature 50 micron gold-plated contacts and a moulded snagless boot that protects the latch during installation. It is rated to 550 MHz and meets the TIA/EIA-568-B-2.1 draft 9 standard.
What To Verify Before Buying
Confirm that your network equipment uses standard RJ45 ports and that a 7 ft (2.13 m) reach is sufficient for the intended run. The cable is unshielded UTP, so it is designed for typical indoor environments without high electromagnetic interference. Ensure the white colour matches your cable-management scheme and that the snagless boot clearance fits the port spacing on your switch, router or patch panel.
Behaviour Under Sustained Load
The bonded-pair construction maintains consistent twist spacing along the full length, which keeps near-end crosstalk low during continuous high-throughput traffic. By reducing impedance variation and structural return loss compared with 100 MHz rated wire, the cable supports stable Gigabit Ethernet and bandwidth-intensive voice, data or video streams over extended periods without signal degradation.
Highlights
- Snagless boot prevents cable catches during installation
- Cat6 rated for 550 MHz bandwidth performance
- 24 AWG stranded copper conductors ensure flexibility
- 50 micron gold-plated RJ45 connectors resist corrosion
- Meets TIA/EIA-568-B-2.1 Category 6 standard
Specifications
| Brand | C2G |
|---|---|
| Model | 27162 |
| Type | others |
| Cat | 6 |
| Connector A | RJ45 Male |
| Connector B | RJ45 Male |
| Length | 7 ft. |
| Color | White |
| Shielded | No |
| Features | Conductor: 4-pair (UTP) 24 AWG stranded copper Connector: 50 micron gold-plated RJ45 Jacket: PVC Standard: Category 6 TIA/EIA-568-B-2.1, draft 9 Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. |
| Shipping weight | 0.10 kg |
| Package size | 178 × 133 × 19 mm |
Questions about this item
Does the 7 ft Cat6 cable arrive with both RJ45 connectors already fitted, or must I crimp them myself?
Both ends are factory-terminated with gold-plated RJ45 male plugs, so the cable is ready to plug in without any crimping.
Should I choose the 7 ft white Cat6 patch cable or a longer length for a typical desk-to-switch run?
At 7 ft (2.13 m) this length suits short connections such as a PC to a nearby switch or router; select a longer cable only if the devices are farther apart.
What does the 550 MHz rating mean for everyday Gigabit Ethernet use?
The 550 MHz bandwidth exceeds the 100 MHz required for Gigabit speeds, providing extra headroom for stable data, voice and video transmission.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084594BTC
In stock
