We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 Ethernet patch cable with snagless RJ45 connectors, 1 ft

Cables To Go

Cables To Go 27160 Cat6 network ethernet cable, white, 1 ft

SKU CH-V9X1-VGD4M MPN 27160

White Cat6 patch cable with snagless RJ45 connectors for 550 MHz voice, data and video distribution

  • TypeNetwork Cable
  • Cat6
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length1 ft.
  • ColorWhite
  • Supports bandwidth-intensive tasks up to 550 MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Snagless boot protects connector tabs during handling
  • Bonded pair construction maintains twist spacing to termination
  • Shortened plug body reduces Near-End Crosstalk interference

1 ft Cat6 patch cable for tight links

This 1-foot white Cat6 patch cable connects two RJ45 ports in voice, data or video distribution. The short length suits patch panels, wall plates or adjacent rack gear where slack must be avoided. It is built to meet Cat6 TIA/EIA-568-B-2.1 draft 9 requirements for 550 MHz bandwidth. The snagless boots protect the latch during frequent moves.

Unshielded UTP limits in noisy runs

As an unshielded twisted-pair cable it relies on pair geometry rather than foil or braid for noise rejection. In environments with strong electromagnetic fields or long parallel power runs the lack of shielding can increase error rates. The 550 MHz rating assumes standard Cat6 channel conditions; performance drops if bend radius or termination quality degrades. Installers should keep the cable away from fluorescent ballasts and motor cables.

Bonded pairs and short plug reduce crosstalk

Each pair is bonded to maintain twist spacing to the connector, preserving impedance balance along the full 0.30 metre length. The shortened plug body lowers near-end crosstalk, helping the link pass certification tests. White jacket colour aids quick identification in dense white-on-white patch fields. The snagless moulded boots prevent latch breakage when cables are pulled through cable managers.

Highlights

  • Supports bandwidth-intensive tasks up to 550 MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Snagless boot protects connector tabs during handling
  • Bonded pair construction maintains twist spacing to termination
  • Shortened plug body reduces Near-End Crosstalk interference

Specifications

BrandC2G
Model27160
TypeNetwork Cable
Cat6
Connector ARJ45 Male
Connector BRJ45 Male
Length1 ft.
ColorWhite
ShieldedNo
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during
Shipping weight0.02 kg
Package size152 × 25 × 13 mm

Questions about this item

Should I choose a longer Cat6 cable or stick with the 1 ft length?

The 1 ft length suits short patch connections between a switch and a wall jack or a desktop PC; pick a longer cable only if the devices sit farther apart.

What does the 550 MHz rating mean for my Gigabit network?

The 550 MHz bandwidth headroom lets the cable carry 1 Gbps Ethernet with margin for crosstalk and return-loss, so real-world throughput stays at line rate.

Does the RJ45 connector work with standard Cat6 wall plates and switches?

Yes, the RJ45 male plugs follow the TIA/EIA-568-B-2.1 draft 9 pinout, so they mate with any Cat6-compliant jack or switch port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.