We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6 UTP patch cable, 150 ft, snagless RJ45 connectors

Cables To Go

Cables To Go 27159 150 ft Cat6 network ethernet cable

SKU CH-YVF5-0PX1H MPN 27159

A 150 ft Cat6 UTP patch cable with snagless boots and bonded pairs for reduced crosstalk

  • TypeConsumer Electronics
  • Cat6
  • Length150 ft
  • ColorBlack
  • FeaturesCable Characteristic:Patch Cable
  • Cat6 bandwidth supports high-speed data and video
  • 150 ft length covers long residential or commercial runs
  • Snagless boot prevents catches and adds strain relief
  • Shortened plug body reduces near-end crosstalk
  • Bonded pairs keep twist spacing to the termination point

150 ft Cat6 patch cable

The Cables To Go 27159 is a 150-foot Cat6 unshielded twisted-pair patch cable with RJ-45 male connectors on both ends. It is built to TIA/EIA-568-B-2.1 draft 9 standards and uses bonded-pair construction to maintain twist spacing through the termination point for consistent signal quality.

Installers needing a long UTP run

The snagless boot and shortened body plug reduce snags and near-end crosstalk during installation, suiting residential or commercial voice, data and video distribution. Builders who require shielded cable for EMI-heavy environments or a plenum-rated jacket for air-handling spaces should select a different cable type.

150-foot length

At 150 feet the cable exceeds the 45-metre permanent-link guideline for Cat6 channels, so the single specification that decides fit is whether the total installed run stays within the channel budget allowed by your network design.

Highlights

  • Cat6 bandwidth supports high-speed data and video
  • 150 ft length covers long residential or commercial runs
  • Snagless boot prevents catches and adds strain relief
  • Shortened plug body reduces near-end crosstalk
  • Bonded pairs keep twist spacing to the termination point

Specifications

BrandC2G
Model27159
TypeConsumer Electronics
Cat6
Length150 ft
ColorBlack
FeaturesCable Characteristic:Patch Cable
Shipping weight2.27 kg
Package size333 × 264 × 74 mm

Questions about this item

What connector spacing does the 150 ft Cat6 patch cable need at the patch panel or wall jack?

The cable uses standard RJ-45 male connectors on both ends, so it fits any standard keystone jack, patch panel port, or switch port with 8P8C spacing.

Which end of the 27159 cable should be terminated first to avoid snagging the molded boot?

Route the cable fully before seating either RJ-45 plug; the snagless boot protects the latch during the pull, but forcing a connected end through tight bends can still damage the boot.

How often should a 150 ft Cat6 UTP run be re-certified after installation?

Re-test with a Cat6-qualified cable analyser after any physical disturbance — moves, crushes, or re-terminations — otherwise the bonded-pair construction maintains Cat6 TIA/EIA-568-B-2.1 performance for the life of the install.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.