We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6 Ethernet patch cable with snagless RJ45 connectors, 3 ft length

Cables To Go

Cables To Go 27151 Cat6 network ethernet cable 3 ft 550 MHz

SKU CH-ZY48-V076W MPN 27151

Cat6 snagless patch cable supports voice, data and video up to 550 MHz

  • Typeothers
  • Cat6
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length3 ft.
  • ColorBlack
  • Cat6 rating supports bandwidth-intensive tasks up to 550 MHz
  • Snagless boots protect RJ45 clips during frequent connects and disconnects
  • 3 ft length keeps short runs tidy without excess slack
  • Meets TIA/EIA-568-B-2.1 draft 9 standards for reliable performance
  • Black jacket blends cleanly into rack and desk environments

3 ft Cat6 550 MHz Patch Cable

This three-foot Cat6 patch cable carries voice, data and video at up to 550 MHz. Snagless boots protect the RJ45 clips during repeated insertion and removal. The unshielded twisted-pair construction meets TIA/EIA-568-B-2.1 draft 9 requirements for balanced transmission.

Best for short runs in racks and desks

Ideal for installers who need a short, standard-compliant link between a switch and a panel or a workstation and a wall jack. Not suited for runs longer than the supplied length, for outdoor or direct-burial use, or for shielded environments that require foil or braid screening.

Cat6 rated to 550 MHz bandwidth

The 550 MHz rating is the single figure that confirms the cable supports gigabit and multi-gigabit Ethernet over its full length. If your design requires higher bandwidth or a different category rating, this part will not meet that specification.

Highlights

  • Cat6 rating supports bandwidth-intensive tasks up to 550 MHz
  • Snagless boots protect RJ45 clips during frequent connects and disconnects
  • 3 ft length keeps short runs tidy without excess slack
  • Meets TIA/EIA-568-B-2.1 draft 9 standards for reliable performance
  • Black jacket blends cleanly into rack and desk environments

Specifications

BrandC2G
Model27151
Typeothers
Cat6
Connector ARJ45 Male
Connector BRJ45 Male
Length3 ft.
ColorBlack
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during i
Shipping weight0.05 kg
Package size127 × 95 × 6 mm

Questions about this item

What connector type does the C2G 27151 cable use for each end?

Both ends use RJ45 male connectors that plug directly into standard Ethernet ports on routers, switches or network cards.

How should the snagless boot be handled during installation to avoid damage?

Push the connector straight in until it clicks; do not pull the cable sideways or yank the boot off, as that can break the latch.

When should this Cat6 550 MHz patch cable be replaced?

Replace it if the jacket is cut, the connectors feel loose, or network tests show errors that disappear with a known-good cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.