We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6 Ethernet cable with snagless RJ45 connectors, 14 ft

Cables To Go

Cables To Go 27144 Cat6 network ethernet cable 14 ft Blue

SKU CH-0FN0-A4RQF MPN 27144

Snagless Cat6 patch cable with RJ45 connectors supports gigabit and 100 Mbps networks over 14 ft

  • Typeothers
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length14 ft.
  • ColorBlue
  • Supports Gigabit Ethernet up to 1000 Mbps
  • Snagless boot prevents connector damage during installation
  • Bonded pair construction maintains twist spacing for signal integrity
  • Shortened plug body reduces Near-End Crosstalk
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards

Network patch cable for gigabit links

This Cat 6 UTP patch cable carries 10, 100 and 1000 BASE-T traffic along with Token Ring, ATM and voice circuits. The 14 ft length suits desk-to-switch runs in offices or home labs. It meets TIA/EIA-568-B-2.1 draft 9 requirements for impedance and structural return loss.

Snagless boot and bonded pairs

A moulded snagless boot protects the RJ45 latch during frequent moves, while bonded twisted pairs preserve twist spacing to the connector. The shortened plug body reduces near-end crosstalk for cleaner signal integrity. No software or additional accessories are included.

PVC jacket with RJ45 connectors

The blue PVC jacket resists kinking and routes easily through cable trays or under carpet. Dual RJ45 ends plug directly into switches, routers, patch panels or wall plates without adapters. The unshielded construction keeps the cable lightweight for temporary or permanent installs.

Highlights

  • Supports Gigabit Ethernet up to 1000 Mbps
  • Snagless boot prevents connector damage during installation
  • Bonded pair construction maintains twist spacing for signal integrity
  • Shortened plug body reduces Near-End Crosstalk
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards

Specifications

BrandC2G
Model27144
Typeothers
Cat6
Connector ARJ45
Connector BRJ45
Length14 ft.
ColorBlue
FeaturesApplications:
- Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3)
- 4/16 Mbps Token Ring (IEEE 802.5)
- 100 VG-AnyLAN
- 100 Mbps TP-PMD (ANSI X3T9.5)
- 55/155 Mbps ATM
- Voice
- T1
- High bandwidth applications such as 622 ATM, Wideband
Compatibility:
- Network Adapters
- Hubs
- Switches
- Routers
- DSL/Cable Modems
- Patch Panels and other twisted-pair applications
Certifications & Standards:
- UL Listed
- TIA/EIA- 568-B-2.1
- Draft 9
Shipping weight0.19 kg
Package size165 × 152 × 19 mm

Questions about this item

Will the snagless boots on the RJ45 connectors need replacement after repeated unplugging?

The flexible molded snagless boots are built into each RJ45 plug to protect the locking tab during insertion and removal; they are not a separate replaceable part.

What bandwidth ceiling appears first when the 14 ft Cat6 run carries sustained Gigabit traffic?

The cable meets Cat6 TIA/EIA-568-B-2.1 draft 9 specifications, supporting 1000 BASE-T Gigabit Ethernet over the full 14 ft length.

Does the unshielded twisted-pair design generate noticeable heat or signal loss during all-day operation?

As a passive UTP patch cable it draws no power and produces no heat; bonded pair construction and the shortened body plug keep NEXT and return loss within Cat6 limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.