We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6 ethernet cable, one foot long, snagless RJ45 plugs

Cables To Go

Cables To Go 27140 Cat6 network ethernet cable 1 ft Blue

SKU CH-FQE9-F956N MPN 27140

A one-foot Cat6 patch cable with snagless RJ45 connectors for Gigabit Ethernet and voice applications

  • Typeothers
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorBlue
  • Gigabit Ethernet support up to 1000 BASE-T for high-speed data transfer
  • Snagless boot design prevents cable snags and adds strain relief during installation
  • Bonded pair construction maintains twist spacing to reduce interference and improve signal integrity
  • Short 1-foot length ideal for tight rack spaces or close device connections
  • Compliant with Cat6 TIA/EIA-568-B-2.1 draft 9 standards for reliable performance

Cat6 patch cable for short runs

This Cat6 unshielded twisted-pair patch cable uses RJ45 connectors on both ends and measures 1 ft. It supports Gigabit 1000 BASE-T, 100 BASE-T and 10 BASE-T Ethernet along with legacy Token Ring and ATM standards. The snagless boot protects the latch during frequent moves and the bonded pairs preserve twist spacing to the termination point.

Installers needing a short, flexible link

The 1 ft length suits patch-panel-to-switch jumpers or desk-side device connections where slack must be minimised. Buyers who need longer horizontal runs, outdoor-rated jackets or shielded construction for noisy environments should select a different cable type.

Length fixed at 1 ft

The cable cannot be extended or shortened without re-termination, so the distance between the two RJ45 ports must match this exact measurement. Verify the required reach before ordering.

Highlights

  • Gigabit Ethernet support up to 1000 BASE-T for high-speed data transfer
  • Snagless boot design prevents cable snags and adds strain relief during installation
  • Bonded pair construction maintains twist spacing to reduce interference and improve signal integrity
  • Short 1-foot length ideal for tight rack spaces or close device connections
  • Compliant with Cat6 TIA/EIA-568-B-2.1 draft 9 standards for reliable performance

Specifications

BrandC2G
Model27140
Typeothers
Cat6
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorBlue
FeaturesApplications:
- Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3)
- 4/16 Mbps Token Ring (IEEE 802.5)
- 100 VG-AnyLAN
- 100 Mbps TP-PMD (ANSI X3T9.5)
- 55/155 Mbps ATM
- Voice
- T1
- High bandwidth applications such as 622 ATM, Wideband
Compatibility:
- Network Adapters
- Hubs
- Switches
- Routers
- DSL/Cable Modems
- Patch Panels and other twisted-pair applications
Certifications & Standards:
- UL
- TIA/EIA- 568-B-2.1
- Draft 9
Shipping weight0.02 kg
Package size127 × 51 × 6 mm

Questions about this item

What devices need RJ45 ports to use this 1 ft Cat6 cable?

Any equipment with RJ45 jacks — computers, routers, switches, patch panels — can connect directly with the two male RJ45 ends on this cable.

Will this Cat6 patch cable work with my older 10 BASE-T and 100 BASE-T gear?

Yes, the cable supports 10 BASE-T, 100 BASE-T and Gigabit 1000 BASE-T, so it runs at the highest speed both ends can negotiate.

How can I verify the cable is delivering Cat6 performance after I plug it in?

Check the link lights for a 1000 Mbps connection and run a cable certifier or throughput test to confirm Gigabit speeds with low crosstalk.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.