Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
A 25-foot Cat6 patch cable with snagless RJ45 connectors rated for 550 MHz bandwidth
This 25-foot Cat6 patch cable connects network devices with RJ45 male connectors on both ends. It supports voice, data and video distribution for bandwidth-intensive applications up to 550 MHz. The gray jacket uses unshielded twisted-pair construction bonded to maintain twist spacing to the termination point. Molded snagless boots prevent cable snags and provide strain relief during installation.
The cable suits home and small-office installers who need a reliable 25-foot run for gigabit Ethernet, IP cameras or VoIP phones. Builders requiring shielded cable for high-EMI environments, plenum-rated jackets for air-handling spaces, or runs longer than the supplied length should look at alternative products.
The single specification that decides fit is Category 6 compliance with TIA/EIA-568-B-2.1 draft 9, which guarantees performance up to 550 MHz and reduced impedance and structural return loss. If your project demands Cat6a or higher bandwidth ratings, this cable will not meet that requirement.
| Brand | C2G |
|---|---|
| Model | 27135 |
| Type | Network Cable |
| Cat | 6 |
| Connector A | RJ45 Male |
| Connector B | RJ45 Male |
| Length | 25 ft. |
| Color | Gray |
| Features | For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during i |
| Shipping weight | 0.32 kg |
| Package size | 178 × 165 × 32 mm |
The cable is 25 ft (7.62 m) long with RJ45 male connectors on both ends, which is sufficient for typical room‑scale runs between a wall outlet and a computer or switch.
Align the RJ45 plug with the port, push straight in until the snagless boot clicks, and pull the cable body — not the boot — when removing it to avoid breaking the latch.
Replace it if the boot cracks, the latch fails to hold, connectors show corrosion, or you experience persistent link errors that a known‑good cable resolves.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?