We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6 Ethernet cable with snagless RJ45 connectors, 7 ft length

Cables To Go

Cables To Go 27132 Cat6 network ethernet cable 7 ft gray

SKU CH-D1W3-E1WMD MPN 27132

Cat6 patch cable with snagless RJ45 connectors supports 550 MHz bandwidth for voice, data and video distribution

  • Typeothers
  • Cat6
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length7 ft.
  • ColorGray
  • Supports bandwidth-intensive apps up to 550MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Snagless boot prevents cable snags during installation
  • Bonded pairs maintain twist-spacing to the termination point
  • 7 ft length suits short-run network connections

Cat6 patch cable for gigabit networks

This 7 ft gray Cat6 patch cable connects network adapters, switches, routers, modems and patch panels. Bonded pair construction preserves twist spacing to the termination point, while the shortened plug body reduces near-end crosstalk. It supports voice, data and video distribution at up to 550 MHz bandwidth.

Upgrade from Cat5e when crosstalk matters

Replacing older 100 MHz rated cables with this Cat6 design cuts impedance mismatch and structural return loss, which helps sustain gigabit speeds over longer runs. The jump is worth it when installing new drops or refreshing links that show errors on certification testers.

Snagless boot eases routing through tight spaces

The molded snagless boot prevents the latch from catching on adjacent cables or cable management, and adds strain relief at the connector. Installation fails most often when the boot is forced past a sharp bend, so allow a gentle radius rather than kinking the jacket.

Highlights

  • Supports bandwidth-intensive apps up to 550MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards
  • Snagless boot prevents cable snags during installation
  • Bonded pairs maintain twist-spacing to the termination point
  • 7 ft length suits short-run network connections

Specifications

BrandC2G
Model27132
Typeothers
Cat6
Connector ARJ45 Male
Connector BRJ45 Male
Length7 ft.
ColorGray
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during i
Shipping weight0.10 kg
Package size178 × 140 × 13 mm

Questions about this item

What connectors does the 27132 cable use for patch-panel or switch ports?

Both ends carry an RJ45 male plug with a moulded snagless boot, so the cable plugs directly into any standard RJ45 jack on patch panels, switches, routers or modems.

How do you seat the RJ45 plugs without damaging the snagless boot?

Push each plug straight into the port until you hear the tab click; the shortened body and moulded boot prevent the latch from catching on adjacent cables during insertion.

When should the 7 ft Cat6 patch lead be replaced?

Replace it if the boot cracks, the latch stops clicking, or you see kinks that could degrade the 550 MHz bandwidth rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.