We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DVI-D dual-link cable with male connectors, 3.0 m

Cables To Go

Cables To Go 26942 R DVI-D dual-link cable 3.0 m

SKU CH-H0JN-HJJYS MPN 26942 R

A 3.0 m DVI-D dual-link cable with 24-pin male connectors on both ends, shielded to reduce EMI/RFI interference and rated for up to 9.9 Gbps transmission

  • TypeDVI-D to DVI-D
  • ColorBlack
  • Cable Length9.84 ft. (3.0m)
  • Connector Number2
  • Terminal GenderMale to Male
  • SpecificationsConnectors: DVI-D Dual-Link 24-pin Male to DVI-D Dual Link 2
  • Dual-link 24-pin connectors support 9.9 Gbps bandwidth
  • 0 m length suits typical desk-to-display runs
  • 28 AWG conductors with shielded undermold reduce EMI/RFI
  • Male-to-male DVI-D ends connect PCs and monitors directly
  • Black jacket blends with standard AV setups

3 m DVI-D dual-link cable

This 3.0 m DVI-D dual-link cable carries a 24-pin male connector at each end. It supports dual-link digital signalling up to 9.9 Gbps for high-resolution video. A shielded undermold reduces EMI and RFI interference. The cable is finished in black and built to the DVI standard.

Desks that need a 3 m reach

The 3.0 m length suits monitors placed farther from the source. Shorter runs may prefer a shorter cable to reduce clutter. Builders who need HDMI or DisplayPort connectivity must choose a different cable type. The fixed DVI-D connectors cannot adapt to other interfaces.

Fits DVI-D dual-link ports

Both ends plug directly into DVI-D dual-link sockets on graphics cards and displays. No adapters or active electronics are required. The shielded construction helps keep the signal clean in electrically noisy environments. The cable frees up shorter cables for other connections.

Highlights

  • Dual-link 24-pin connectors support 9.9 Gbps bandwidth
  • 0 m length suits typical desk-to-display runs
  • 28 AWG conductors with shielded undermold reduce EMI/RFI
  • Male-to-male DVI-D ends connect PCs and monitors directly
  • Black jacket blends with standard AV setups

Specifications

BrandC2G
Model26942
TypeDVI-D to DVI-D
ColorBlack
Cable Length9.84 ft. (3.0m)
Connector Number2
Terminal GenderMale to Male
SpecificationsConnectors: DVI-D Dual-Link 24-pin Male to DVI-D Dual Link 24-pin Male
Dual link digital signaling allows for high speed transmission up to 9.9Gbps
Shielded undermold protects against unwanted EMI/RFI interference
28AWG copper conductors are individually insulated in foam-polypropylene to minimize crosstalk, ensuring high-speed, error-free transmission
Tri-shielded with dual Mylar foil and braid shield reduces interference
Gold-plated contacts provide full conductivity with no data loss
Supports hot plugging of DVI display devices
PC and Mac compatible
Resolutions up to 2048 x 1536
S
FeaturesDigital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. DVI-D Digital Cables from Cables To Go deliver the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow. These precision-engineered cables are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVD-D dual link configuration provides enough bandwidth for resolutions up to 2048 x 1536 and allows high s
Shipping weight0.91 kg
Package size339 × 283 × 23 mm

Questions about this item

Do I need a graphics card and monitor that both have DVI-D dual-link 24-pin ports for this cable to work?

Yes, both devices must provide a DVI-D dual-link 24-pin female socket to accept the male connectors on this 3.0 m cable.

Will this dual-link cable work if I keep an older single-link DVI monitor or GPU?

The cable is backward compatible; it will carry a single-link signal when either end only supports single-link, though bandwidth remains limited to the older device.

How can I confirm the link is running at dual-link speeds after connecting the cable?

Check your graphics driver control panel — it should report a dual-link DVI connection and allow resolutions or refresh rates that exceed single-link bandwidth limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.