Cables To Go
Cables To Go 25462 network ethernet cable Cat5e RJ45 1 ft blue unshielded
Cat5e unshielded patch cable with RJ45 connectors, rated for 350 MHz bandwidth and 1 ft length in blue
- Typeothers
- Cat5E
- Connector ARJ45 Male
- Connector BRJ45 Male
- Length1 ft.
- ColorBlue
- Handles bandwidth-intensive applications up to 350 MHz
- Meets all Cat5e TIA/EIA standards for reliable performance
- Bonded-pair construction maintains twist spacing to the connector
- Non-booted unshielded design with shortened body plug
- One-foot length suits tight patch-panel connections
1-foot Cat5e patch cable
This one-foot Cat5e patch cable uses unshielded twisted-pair construction with RJ45 male connectors on both ends. It is rated for bandwidth-intensive applications up to 350 MHz and meets all Cat5e TIA/EIA standards. The shortened body plugs help keep near-end crosstalk levels low. The blue jacket allows quick colour-coding in network installations.
Suited for short rack links; not for long runs
Builders who need a very short link between a switch and a server or patch panel will find the one-foot length tidy and compliant. Installations that require shielded cable, longer reach or outdoor-rated jackets should look at a different cable type. The non-booted plugs save space but offer no strain-relief boot for frequent reconnection.
350 MHz bandwidth rating
The cable is verified for applications up to 350 MHz, well above the base 100 MHz requirement for Cat5e. This headroom supports fast Ethernet and gigabit data, voice and video distribution without exceeding the specified frequency limit. If your design demands performance beyond 350 MHz, a higher-category cable is required.
Highlights
- Handles bandwidth-intensive applications up to 350 MHz
- Meets all Cat5e TIA/EIA standards for reliable performance
- Bonded-pair construction maintains twist spacing to the connector
- Non-booted unshielded design with shortened body plug
- One-foot length suits tight patch-panel connections
Specifications
| Brand | C2G |
|---|---|
| Model | 25462 |
| Type | others |
| Cat | 5E |
| Connector A | RJ45 Male |
| Connector B | RJ45 Male |
| Length | 1 ft. |
| Color | Blue |
| Shielded | No |
| Features | For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. |
| Shipping weight | 0.01 kg |
| Package size | 127 × 89 × 6 mm |
Questions about this item
Will the RJ45 plugs on this 1 ft Cat5e cable need replacing after repeated insertion cycles?
The non-booted RJ45 male connectors are rated for standard insertion cycles; replace the cable if the latch tab breaks or contacts show corrosion.
What bandwidth ceiling appears first when this 350 MHz Cat5e cable runs at full load?
The 350 MHz rating is the design limit; sustained gigabit traffic will not exceed it, so the cable itself does not become the bottleneck.
Does the unshielded 1 ft patch cable generate noticeable heat or draw extra power during all-day operation?
Passive copper UTP cables produce no heat and consume no power regardless of how long data flows through them.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



