We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat5e ethernet cable 10 ft with snagless RJ45 connectors

Cables To Go

Cables To Go 25428 Cat5e network ethernet cable 10 ft White

SKU CH-VNC5-1SHQA MPN 25428

Cat5e UTP patch cable with snagless RJ45 connectors, 10 ft length and 24 AWG stranded copper conductors

  • Typeothers
  • Cat5E
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorWhite
  • Cat 5e performance up to 350 MHz bandwidth
  • Snagless boot protects the clip during frequent moves
  • 10 ft length suits typical desk-to-switch runs
  • 24 AWG stranded copper conductors stay flexible
  • UL verified to TIA/EIA-568B Category 5e standards

Cat5e 10 ft Ethernet Cable

This Cat5e patch cable connects network adapters, hubs, switches, routers and patch panels using RJ45 connectors on both ends. The 10 ft length suits short runs between devices on a desk or in a rack. White jacket colour helps identify the link in a colour-coded installation.

350 MHz Bandwidth Limit

The cable is verified to 350 MHz, supporting Fast Ethernet and Gigabit Ethernet up to 100 metres per TIA/EIA-568B. Bandwidth-intensive applications above this frequency require Cat6 or higher cabling. The 24 AWG stranded copper conductors meet the standard for patch cords but are not rated for solid-core backbone runs.

Snagless Boot Installation

Moulded snagless boots protect the locking tabs during routing through cable managers or tight spaces. Stranded conductors make the cable flexible for patching but more fragile than solid wire if repeatedly bent sharply. Wiring follows the 568B pinout; verify the opposite end matches to avoid crossed pairs.

Highlights

  • Cat 5e performance up to 350 MHz bandwidth
  • Snagless boot protects the clip during frequent moves
  • 10 ft length suits typical desk-to-switch runs
  • 24 AWG stranded copper conductors stay flexible
  • UL verified to TIA/EIA-568B Category 5e standards

Specifications

BrandC2G
Model25428
Typeothers
Cat5E
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorWhite
FeaturesSnagless for long-term durability; use for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.
Conductor: 4-pair (UTP) 24 AWG stranded copper
Connector: 50 micron gold-plated RJ45
Jacket: PVC
Wired: TSB 568B (AT&T 258A)
Certification: TIA/EIA
Weight: 0.230lbs.
For fast ethernet and gigabit computer networks that require Enhanced Category 5 cabling for voice/data/video distribution. This cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces b
Shipping weight0.10 kg
Package size152 × 133 × 13 mm

Questions about this item

What length should I pick for a typical desk-to-switch run?

The cable is 10 ft (3.04 m) long, which suits most desk-to-patch-panel or desk-to-switch distances without excess slack.

What real-world speed does the 350 MHz rating support?

At 350 MHz the cable meets Cat5e TIA/EIA-568B requirements and handles Gigabit Ethernet traffic in practice.

Which connector standard does the RJ45 plug follow?

Both ends use RJ45 wired to the TIA/EIA-568B pinout, so they work with any standard Ethernet port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.