We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige USB-A to DB25 parallel printer cable, 6 ft

Cables To Go

Cables To Go 16899 USB to DB25 parallel printer cable 6 ft 1.82 m

SKU CH-M011-0PQFJ MPN 16899

Connects a parallel printer to a USB port using a 6 ft IEEE-1284 DB25 adapter cable

  • TypeCable Connectors
  • ColorBlack
  • Length0.5 ft.
  • Connector Number1
  • Connector DetailConnector 1: USB Type A Male Connector 2: DB25 Female
  • FeaturesCable Length: 6 ftConnector on First End: 1 x 25-pin DB-25 F
  • Connect legacy parallel printers to modern USB ports
  • 6 ft cable length provides flexible placement options
  • IEEE-1284 DB25 female connector ensures broad printer compatibility
  • USB Type-A male plug works with standard computer ports
  • Lightweight 176.9 g design reduces strain on connections

USB-to-parallel adapter cable

The Cables To Go 16899 connects a DB25 parallel printer to a USB Type-A port on computers that lack a legacy parallel interface. It supports inkjet, laser and high-speed printers using the IEEE 1284 standard. The 1.82 m cable length gives enough reach for typical desktop layouts.

IEEE 1284 signalling over USB

The adapter handles the parallel handshake so the operating system sees a standard USB printer connection. This removes IRQ conflicts that can occur with native parallel ports and lets you attach multiple printers directly to separate USB ports without a switchbox. No external power supply is required.

Check port and driver compatibility

Verify the printer uses a 25-pin DB25 female connector and that your operating system includes or can load a driver for USB-to-parallel adapters. Some very old printers may need a specific driver package not supplied with the cable. The connector on the computer side is a standard 4-pin USB Type-A male plug.

Highlights

  • Connect legacy parallel printers to modern USB ports
  • 6 ft cable length provides flexible placement options
  • IEEE-1284 DB25 female connector ensures broad printer compatibility
  • USB Type-A male plug works with standard computer ports
  • Lightweight 176.9 g design reduces strain on connections

Specifications

BrandC2G
Model16899
TypeCable Connectors
ColorBlack
Length0.5 ft.
Connector Number1
Connector DetailConnector 1: USB Type A Male
Connector 2: DB25 Female
FeaturesCable Length: 6 ftConnector on First End: 1 x 25-pin DB-25 Female IEEE 1284 ParallelConnector on Second End: 1 x 4-pin Type A Male USBColor: BlueWeight (Approximate): 176.9 g
Shipping weight0.12 kg
Package size133 × 127 × 25 mm

Questions about this item

Will the USB-A plug or DB25 connector wear out first with daily plugging?

Both ends are passive connectors rated for standard mating cycles; no moving parts or active electronics exist inside the 16899 cable to degrade.

What length limit applies when the cable runs at full IEEE-1284 speed all day?

The 1.82 m (6 ft) length matches the IEEE-1284 specification maximum, so signal integrity holds at full parallel throughput.

Does the adapter draw enough USB power to warm up during continuous printing?

It pulls only the few milliamps needed for the IEEE-1284 logic translator, so the blue jacket stays at ambient temperature.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.