We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat5e snagless Ethernet patch cable, 10 ft, RJ45 male connectors, molded boots

Cables To Go

Cables To Go 15199 Cat5e network ethernet cable 10 ft 350 MHz

SKU CH-5W6H-YTHV1 MPN 15199

A 10 ft Cat5e patch cable rated for 350 MHz bandwidth with snagless RJ45 connectors

  • Typeothers
  • Cat5E
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length10 ft.
  • ColorGray
  • Handles bandwidth-intensive applications up to 350 MHz
  • Meets all Cat5e TIA/EIA standards for reliable performance
  • Bonded-pair construction maintains twist spacing to the termination point
  • Snagless boot prevents cable catches during installation
  • 10 ft (3.04 m) length suits typical patch-cable runs

Cat5e 350 MHz patch cable

This 10 ft Cat5e Ethernet cable uses unshielded twisted-pair construction with RJ45 male connectors on both ends. It is built for voice, data and video distribution in home or office networks. The snagless boot protects the latch during routing and the gray jacket identifies the run at a glance. Condition is new.

350 MHz bandwidth headroom

The cable is rated for bandwidth-intensive applications up to 350 MHz, well above the 100 MHz baseline for standard Cat5e. That headroom supports Gigabit Ethernet and high-throughput video streams without hitting the cable's rated limit. Runs longer than the 10 ft length or installations near strong EMI sources may reduce practical throughput. The unshielded design offers no protection against external interference.

Cat5e TIA/EIA channel limits

The link meets Cat5e TIA/EIA requirements for impedance and structural return loss, with bonded pairs that preserve twist spacing to the termination. Maximum certified channel length for the standard is 100 metres, so this 3.04 metre segment leaves ample margin for the rest of the run. Unshielded construction means alien crosstalk can become the limiting factor in dense bundles. The 350 MHz rating does not extend the standard's 100 metre distance limit.

Highlights

  • Handles bandwidth-intensive applications up to 350 MHz
  • Meets all Cat5e TIA/EIA standards for reliable performance
  • Bonded-pair construction maintains twist spacing to the termination point
  • Snagless boot prevents cable catches during installation
  • 10 ft (3.04 m) length suits typical patch-cable runs

Specifications

BrandC2G
Model15199
Typeothers
Cat5E
Connector ARJ45 Male
Connector BRJ45 Male
Length10 ft.
ColorGray
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350MHz.
Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during installation and p
Shipping weight0.10 kg
Package size191 × 140 × 13 mm

Questions about this item

Will this 350 MHz Cat5e cable work with my older 100 MHz network switch?

Yes, the cable meets Cat5e TIA/EIA standards and is backward compatible with 100 MHz equipment, so it will function normally with your existing switch.

How can I verify the cable is performing at its rated 350 MHz after installation?

Use a cable certifier or network tester that measures bandwidth up to 350 MHz; the bonded-pair construction and UL verification ensure the twist spacing is maintained for certified performance.

Does the 10 ft gray cable come with both RJ45 connectors attached, or do I need to buy plugs separately?

The cable ships with RJ45 male connectors already crimped on both ends and includes molded snagless boots, so no additional connectors or tools are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.