We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode fibre cable with SC connectors, 3 m

Cables To Go

Cables To Go 12505 fibre optic cable SC-SC 9/125 duplex single-mode PVC yellow 9.8 ft 3 m

SKU CH-J3E9-R04QM MPN 12505

A yellow 9/125 single-mode duplex patch cord with SC connectors on both ends, tested for 0.30 dB typical insertion loss and -55 dB return loss

  • TypeCable Connectors
  • ColorYellow
  • Length0.5 ft.
  • Connector Number1
  • Connector DetailConnector A: 2 x SC Male Connector B: 2 x SC Male
  • SpecificationsSC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm D
  • OS2 single-mode fiber supports long-distance gigabit links
  • SC-SC duplex connectors tested to 0.30 dB typical loss
  • 100 % optically inspected for insertion loss before shipping
  • Patented injection-molded connectors resist pulls and impacts
  • Yellow PVC jacket identifies single-mode cable at a glance

OS2 single-mode fibre patch cord

The Cables To Go 12505 is a duplex single-mode fibre optic cable with SC connectors on both ends. It uses 9/125 micron fibre in a yellow PVC jacket and measures 9.8 ft (3 m) long. The patch cord is intended for gigabit Ethernet links that require long-distance transmission.

Tested insertion loss under continuous traffic

Every unit is 100 % optically inspected and tested for insertion loss before shipping. Typical connector loss is 0.30 dB with a maximum of 0.50 dB, and typical return loss reaches -55 dB. These figures represent steady-state performance rather than a brief benchmark.

Pull-proof jacket and immune to electrical

The patented injection-moulded connectors measure 10.6 mm by 26 mm by 58 mm with the duplex clip installed, giving greater durability against pulls, strains and impacts during installation. The PVC buffer surrounds the fibre, providing a cost-effective path that is immune to electrical interference.

Highlights

  • OS2 single-mode fiber supports long-distance gigabit links
  • SC-SC duplex connectors tested to 0.30 dB typical loss
  • 100 % optically inspected for insertion loss before shipping
  • Patented injection-molded connectors resist pulls and impacts
  • Yellow PVC jacket identifies single-mode cable at a glance

Specifications

BrandCables To Go
Model12505
TypeCable Connectors
ColorYellow
Length0.5 ft.
Connector Number1
Connector DetailConnector A: 2 x SC Male
Connector B: 2 x SC Male
SpecificationsSC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
Maximum Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Typical Return Loss: -55 dB
Buffer Material: PVC
Buffer OD: 900 um
Jacket Material: PVC (OFNR riser-rated)
Jacket OD: 2.8 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Maximum Tensile Load: 100 N/cm
Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
Crush Resistance: 750 N/cm
Impact Resistance: 1,000 cycles
Flex Resistance: 5,00
FeaturesCost-effective solution that provides high bandwidth and transmission rates over longer distances. With SC to SC termination, this high-quality fiber optic patch cable is specifically designed for gigabit ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 single mode fiber, immune to electrical interference.
Shipping weight0.06 kg
Package size229 × 178 × 13 mm

Questions about this item

Does the 9.8 ft single-mode cable generate any heat or noise when installed in a rack that runs continuously?

The cable is a passive optical link with no active components, so it produces no heat and makes no sound during all-day operation.

What equipment must already have SC ports for this patch cord to connect directly?

Both ends terminate in SC male connectors, so the linked devices — such as switches, transceivers or patch panels — must provide matching SC female ports.

Will the 9/125 OS2 cable work alongside existing OM1 multimode jumpers in the same patch panel?

The cable uses 9/125 single-mode fiber, which is a different core size from OM1 multimode; they can share a panel but cannot be interconnected without a media converter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.